The dual diaphragm pump
Authors:
- 13 November 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 519-522
Abstract
This paper reports a major advancement in gas pumping at micro- and meso-scale, made possible by the newly developed, electrostatically actuated, dual-diaphragm pump (DDP). The DDP uses a conformal pumping chamber and two electrostatically actuated, structured diaphragms, to achieve perfect rectification. The DDP demonstrates flow rates of about 30 ml/min and a power consumption of about 8 mW at an overall pump volume of about 1.5/spl times/1.5/spl times/0.1 cm/sup 3/. The DDP is fully symmetrical, having true bidirectional operation; has essentially zero dead space; and is fully scalable. For increased throughput the individual pumping channels can be built in 1D, 2D and 3D arrays. This feature allows the optimization of the individual pumping channel for best performance under electrostatic actuation, but allows scaling of the pumping rate to the desired level. Arrays of 2/spl times/3/spl times/5 pumps have been successfully demonstrated. A DDP array pumping 4 liters per minute will be about 4 times smaller in volume and will use about 4 times less power than the most advanced commercially available air pumps.Keywords
This publication has 3 references indexed in Scilit:
- The first self-priming and bi-directional valve-less diffuser micropump for both liquid and gas2002
- Eau, Brother!Science News, 2000
- Analytical modeling of electrostatic membrane actuator for micro pumpsJournal of Microelectromechanical Systems, 1999