Potential Heat Transfer Fluids (Nanofluids) for Direct Volumetric Absorption-Based Solar Thermal Systems
- 19 July 2017
- journal article
- research article
- Published by ASME International in Journal of Thermal Science and Engineering Applications
- Vol. 10 (1)
Abstract
Nanoparticle dispersions or more popularly “nanofluids” have been extensively researched for their candidature as working fluid in direct-volumetric-absorption solar thermal systems. Flexibility in carving out desired thermophysical and optical properties has lend the nanofluids to be engineered for solar thermal and photovoltaic applications. The key feature which delineates nanofluid-based direct absorption volumetric systems from their surface absorption counterparts is that here the working fluid actively (directly) interacts with the solar irradiation and hence enhances the overall heat transfer of the system. In this work, a host of nanoparticle materials have been evaluated for their solar-weighted absorptivity and heat transfer enhancements relative to the basefluid. It has been found that solar-weighted absorptivity is the key feature that makes nanoparticle dispersions suitable for solar thermal applications (maximum enhancement being for the case of amorphous carbon nanoparticles). Subsequently, thermal conductivity measurements reveal that enhancements on the order of 1–5% could only be achieved through addition of nanoparticles into the basefluid. Furthermore, dynamic light scattering (DLS) and optical measurements (carried out for as prepared, 5 h old and 24 h old samples) reveal that nanoclustering and hence soft agglomeration does happen but it does not have significant impact on optical properties of the nanoparticles. Finally, as a proof-of-concept experiment, a parabolic trough collector employing the amorphous carbon-based nanofluid and distilled water has been tested under the sun. These experiments have been carried out at no flow condition so that appreciable temperatures could be reached in less time. It was found that for the same exposure time, increase in the temperature of amorphous carbon based nanofluid is approximately three times higher as compared to that in the case of distilled water.Keywords
Funding Information
- Anusandhan National Research Foundation (ECR/2016/000462)
This publication has 35 references indexed in Scilit:
- Limits of selectivity of direct volumetric solar absorptionSolar Energy, 2015
- Trends and Opportunities in Direct-Absorption Solar Thermal CollectorsJournal of Thermal Science and Engineering Applications, 2013
- Multifunctional Core-Shell Nanoparticle Suspensions for Efficient AbsorptionJournal of Solar Energy Engineering, 2012
- Solar Energy Harvesting Using Nanofluids-Based Concentrating Solar CollectorJournal of Nanotechnology in Engineering and Medicine, 2012
- Analytical model for the design of volumetric solar flow receiversInternational Journal of Heat and Mass Transfer, 2012
- Spatially Varying Extinction Coefficient for Direct Absorption Solar Thermal Collector OptimizationJournal of Solar Energy Engineering, 2011
- Nanofluid optical property characterization: towards efficient direct absorption solar collectorsDiscover Nano, 2011
- Applicability of nanofluids in high flux solar collectorsJournal of Renewable and Sustainable Energy, 2011
- Nanofluid-based direct absorption solar collectorJournal of Renewable and Sustainable Energy, 2010
- Predicted Efficiency of a Low-Temperature Nanofluid-Based Direct Absorption Solar CollectorJournal of Solar Energy Engineering, 2009