Formation of Poly(methyl methacrylate) Thin Films onto Wool Fiber Surfaces by Vapor Deposition Polymerization
- 13 February 2013
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 5 (5) , 1548-1555
Abstract
Chemical vapor deposition (CVD) polymerization is a useful technique because of the possibility of forming very thin film of pure polymers on substrates with any geometric shape. In this work, thin films of poly(methyl methacrylate) or PMMA were formed on the surfaces of wool fabrics by a CVD polymerization process. Various polymerization initiators including dicumyl peroxide, tert-butyl peroxide, and potassium peroxydisulfate have been investigated to polymerize methyl methacrylate onto the surfaces of wool by the CVD polymerization. The wool fabrics were impregnated with initiators and were then exposed to MMA monomer vapor under vacuum at the boiling temperature of the monomer. Wool fabrics with vapor-deposited PMMA surfaces were characterized by elemental analysis, TGA, FTIR, disperse dye absorption, contact angles measurement, AFM, and SEM. PMMA-coated wool fabrics showed higher contact angle and absorbed more dyes than that of the control wool. It was evident from the results obtained by various characterization techniques that MMA was successfully polymerized and formed thin films on the surfaces of wool fabrics by all initiators investigated but the best results were achieved with tert-butyl peroxide.Keywords
This publication has 44 references indexed in Scilit:
- Synthesis of a carbon nanotube monolith with controlled macroscopic shapeCarbon, 2006
- Kinetics study of radiation-grafting of acrylic acid, acrylonitrile, and their mixture onto wool fabricJournal of Applied Polymer Science, 2006
- Vapor-Deposited Fluorinated Glycidyl Copolymer Thin Films with Low Surface Energy and Improved Mechanical PropertiesMacromolecules, 2006
- Initiated CVD of Poly(methyl methacrylate) Thin FilmsChemical Vapor Deposition, 2005
- Nanofilms Based on Vapor Deposition of Polymerized Polypyrrole and its CharacteristicsJapanese Journal of Applied Physics, 2004
- Hot Filament Chemical Vapor Deposition of Poly(glycidyl methacrylate) Thin Films Using tert-Butyl Peroxide as an InitiatorLangmuir, 2004
- High-permeability fluorinated polyimide microcapsules by vapor deposition polymerizationPolymer, 2003
- Layer-by-layer polycondensation of nylon 66 by alternating vapour deposition polymerizationPolymer, 1997
- Chemical and mechanical properties of methyl methacrylate-grafted wool fiberJournal of Applied Polymer Science, 1992
- Graft copolymerization of methyl methacrylate onto wool initiated by ceric ammonium nitrate–thioglycolic acid redox couple in presence of air. IVJournal of Polymer Science Part A: Polymer Chemistry, 1987