Enhancing the piezoelectric properties of flexible hybrid AlN materials using semi-crystalline parylene
Authors:
- 24 February 2017
- journal article
- research article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 26 (4) , 045005
Abstract
Flexible piezoelectric materials are desired for numerous applications including biomedical, wearable, and flexible electronics. However, most flexible piezoelectric materials are not compatible with CMOS fabrication technology, which is desired for most MEMS applications. This paper reports on the development of a hybrid flexible piezoelectric material consisting of aluminium nitride (AlN) and a semi-crystalline polymer substrate. Various types of semi-crystalline parylene and polyimide materials were investigated as the polymer substrate. The crystallinity and surfaces of the polymer substrates were modified by micro-roughening and annealing in order to determine the effects on the AlN quality. The AlN crystallinity and piezoelectric properties decreased when the polymer surfaces were treated with O 2 plasma. However, increasing the crystallinity of the parylene substrate prior to deposition of AlN caused enhanced c -axis (002) AlN crystallinity and piezoelectric response of the AlN. Piezoelectric properties of 200 °C annealed parylene-N substrate resulted in an AlN d 33 value of 4.87 pm V −1 compared to 2.17 pm V −1 for AlN on polyimide and 4.0 pm V −1 for unannealed AlN/parylene-N. The electrical response measurements to an applied force demonstrated that the parylene/AlN hybrid material had higher V pp (0.918 V) than commercial flexible piezoelectric material (PVDF) ( V pp 0.36 V). The results in this paper demonstrate that the piezoelectric properties of a flexible AlN hybrid material can be enhanced by increasing the crystallinity of the polymer substrate, and the enhanced properties can function better than previous flexible piezoelectrics.Keywords
Funding Information
- Seventh Framework Programme (604360)
This publication has 31 references indexed in Scilit:
- Sustained elevation of activity of developing neurons grown on polyimide microelectrode arrays (MEA) in response to ultrasound exposureMicrosystem Technologies, 2016
- Influence of silicon crystal orientation on piezoelectric textured aluminium nitride deposited on metal electrodesVacuum, 2016
- Widening the bandwidth of vibration energy harvesters using a liquid-based non-uniform load distributionSensors and Actuators A: Physical, 2016
- A review of piezoelectric polymers as functional materials for electromechanical transducersSmart Materials and Structures, 2014
- A MEMS Silicon-based Piezoelectric AC Current SensorProcedia Engineering, 2014
- Highly flexible piezoelectric 0–3 PZT–PDMS composites with high filler contentComposites Science and Technology, 2014
- Fully integrated on-chip nano-electrochemical devices for electroanalytical applicationsElectrochimica Acta, 2014
- Flexible-CMOS and biocompatible piezoelectric AlN material for MEMS applicationsSmart Materials and Structures, 2013
- Aluminum Nitride piezo-MEMS on polyimide flexible substratesMicroelectronic Engineering, 2011
- Preparation of Oriented Aluminum Nitride Thin Films on Polyimide Films and Piezoelectric Response with High Thermal Stability and FlexibilityAdvanced Functional Materials, 2007