Monitoring the collision of a cargo ship with the Vincent Thomas Bridge
Authors:
- 23 May 2007
- journal article
- research article
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 15 (2) , 183-206
Abstract
On 27 August 2006, the Vincent Thomas Bridge, a 1850‐m suspension bridge located in the larger metropolitan Los Angeles region, was struck by a large cargo ship passing under the bridge. Moderate damage to the maintenance scaffolding at the main span of the bridge was observed. This incident left transportation authorities wondering about the structural integrity of the bridge. A real‐time continuous monitoring system that had been recently installed on the bridge successfully recorded dynamic response before and after the incident, as well as during the collision. Analysis of these valuable data allows transportation authorities to quantify the effects of the collision on the bridge structural condition, which would otherwise be infeasible with traditional visual bridge inspection approaches. A forensic study was performed to assess the structural condition of the bridge before and after the incident. Both global (multi‐sensor) and local (single‐sensor) identification methods were applied to detect whether significant changes occurred in the bridge vibration signature. Copyright © 2007 John Wiley & Sons, Ltd.Keywords
This publication has 9 references indexed in Scilit:
- Application of a Web-enabled real-time structural health monitoring system for civil infrastructure systemsSmart Materials and Structures, 2004
- Natural Excitation Technique and Eigensystem Realization Algorithm for Phase I of the IASC-ASCE Benchmark Problem: Simulated DataJournal of Engineering Mechanics, 2004
- A vision-based approach for the direct measurement of displacements in vibrating systemsSmart Materials and Structures, 2003
- System identification of the Vincent Thomas suspension bridge using earthquake recordsEarthquake Engineering & Structural Dynamics, 2003
- Identification of linear structural systems using earthquake-induced vibration dataEarthquake Engineering & Structural Dynamics, 1999
- Nonlinear analysis of the Vincent Thomas Bridge for seismic retrofitComputers & Structures, 1997
- Effects of noise on modal parameters identified by the Eigensystem Realization AlgorithmJournal of Guidance, Control, and Dynamics, 1986
- An eigensystem realization algorithm for modal parameter identification and model reductionJournal of Guidance, Control, and Dynamics, 1985
- Ambient Vibration Tests of Suspension BridgeJournal of the Engineering Mechanics Division, 1978