Direct measurement of strain distribution along a wood bond line. Part 2: Effects of adhesive penetration on strain distribution
Authors:
- Wolfgang GindlWGWolfgang Gindl
- Aleksandra SretenovicASAleksandra Sretenovic
- Angela VincentiAVAngela Vincenti
- Ulrich MüllerUlrich Müller
- 1 May 2005
- journal article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 59 (3) , 307-310
Abstract
The effect of adhesive penetration into wood on the distribution of strain along a mechanically strained bond line was evaluated. With this goal, spruce wood specimens were bonded with phenol-resorcinol-formaldehyde (PRF) and one-component polyurethane resin (PUR). Penetration of the adhesives into cell cavities was observed in a zone extending over several 100 μm from the bond line. Electronic speckle pattern interferometry was used to record the elastic deformations caused by mechanical tests in transverse compression. By differentiating 2D displacement maps, the strain distribution was calculated. Both adhesives provided an increase in the stiffness of the adhesive-wood interface due to penetration into cell cavities. Compression strain was much lower in the bond line area than in the wood. Shear strain was also low in the bond line and increased gradually with increasing distance. No change was observed in wood unaffected by the adhesive. The effects were more pro-nounced for PRF resin than for PUR.Keywords
This publication has 11 references indexed in Scilit:
- The interphase in phenol–formaldehyde and polymeric methylene di-phenyl-di-isocyanate glue lines in woodInternational Journal of Adhesion and Adhesives, 2004
- A numerical study of the shear-strength-predicting capabilities of test specimens for wood–adhesive bondsInternational Journal of Adhesion and Adhesives, 2004
- Examination of the Penetration of Polymeric Methylene Di-Phenyl-Di-Isocyanate (pMDI) into Wood Structure Using Chemical-State X-Ray MicroscopyHolzforschung, 2002
- Wood–thermoplastic adhesive interface—method of characterization and resultsInternational Journal of Adhesion and Adhesives, 2002
- SEM and UV-microscopic investigation of glue lines in Parallam ® PSLEuropean Journal of Wood and Wood Products, 2001
- Adhesive systems for structural connections in timberInternational Journal of Adhesion and Adhesives, 2001
- Weak boundary layers on wood surfacesJournal of Adhesion Science and Technology, 2000
- Influence of bondline brittleness and defects on the strength of timber finger-jointsInternational Journal of Adhesion and Adhesives, 1999
- The performance of adhesive systems for structural timbersInternational Journal of Adhesion and Adhesives, 1997
- Table of ContentsEnvironmental Science & Technology, 1972