Ce-Loaded HZSM-5 Composite for Catalytic Deoxygenation of Algal Hydrolyzed Oil into Hydrocarbons and Oxygenated Compounds
Open Access
Abstract
Despite the extensive research into the catalytic uses of zeolite-based catalysts, these catalysts have a limited useful lifetime because of the deactivating effect of coke production. This study looks at the use of Cerium (Ce) loaded HZSM-5 zeolite catalysts in the hydrocarbon and oxygenated chemical conversion from Chlorella Vulgaris microalgae crude oil. Characterization of structure, morphology, and crystallinity was performed after the catalysts were manufactured using the impregnation technique. Soxhlet extraction was carried out to extract the crude oil of microalgae. Transesterification reaction was used to produce algal hydrolyzed oil (HO), and the resulting HO was put to use in a batch reactor at 300 °C, 1000 rpm, 7 bars of nitrogen pressure, a catalyst to the algal HO ratio of 15% (wt. %), and a retention time of 6 h. To determine which Ce-loaded HZSM-5 catalysts would be most effective in converting algal HO into non-oxygenated molecules (hydrocarbons), we conducted a series of tests. Liquid product characteristics were analyzed for elemental composition, higher heating value (HHV), atomic ratios of O/C and H/C, and degree of deoxygenation (DOD%). Results were categorized into three groups: product yield, chemical composition, and carbon number distribution. When Cerium was added to HZSM-5 zeolite at varying loading percentages, the zeolite’s acid sites became more effective in facilitating the algal HO conversion. The results showed that 10%Ce/HZSM-5 had the greatest conversion of the algal HO, the yield of hydrocarbons, HHV, and DOD% (98.2%, 30%, 34.05 MJ/Kg, and 51.44%, respectively) among all the synthesized catalysts in this research. In conclusion, the physical changes seen in the textural characteristics may be attributed to Cerium-loading on the parent HZSM-5; nevertheless, there is no direct association between the physical features and the hydrocarbons yield (%). The primary impact of Cerium alteration of the parent HZSM-5 zeolite was to change the acidic sites required to boost the conversion (%) of the algal HO in the catalytic deoxygenation process, which in turn increased the hydrocarbons yield (%), which in turn increased the HHV and DOD%.Keywords
Funding Information
- Malaysian Ministry of Education (MoE) (Q JI30000.2546.19H46)
This publication has 92 references indexed in Scilit:
- Zeolite catalysts modified with zirconium and sulfur compounds in the conversion of dimethyl ether to lower olefinsPetroleum Chemistry, 2012
- Catalytic deoxygenation of triglycerides to hydrocarbons over supported nickel catalystsChemical Engineering Journal, 2012
- Reactivity of a NiO/Al2O3 oxygen carrier prepared by impregnation for chemical-looping combustionFuel, 2010
- Hydrocarbon production from decarboxylation of fatty acid without hydrogenCatalysis Today, 2010
- Production of Synthetic Diesel by Hydrotreatment of Jatropha Oils Using Pt−Re/H-ZSM-5 CatalystEnergy & Fuels, 2010
- Catalytic Conversion of Bio-ethanol to Ethylene over La-Modified HZSM-5 Catalysts in a BioreactorCatalysis Letters, 2009
- Catalytic deoxygenation of unsaturated renewable feedstocks for production of diesel fuel hydrocarbonsFuel, 2008
- BiOx clusters occluded in a ZSM-5 matrix: preparation, characterization, and catalytic behavior in liquid-phase oxidation of hydrocarbonsJournal of Catalysis, 2003
- Reduction of nickel-alumina catalystsIndustrial & Engineering Chemistry Research, 1988
- Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)Pure and Applied Chemistry, 1985