Identification and compensation of quadratic terms of a space electrostatic accelerometer
- 1 November 2018
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (11) , 114502
Abstract
The ultra-sensitive space electrostatic accelerometers have been successfully employed in the Earth’s gravity field recovery missions and the space gravitational experiments. Since the accelerometer output in the measurement bandwidth can be influenced by the orbital high-frequency disturbances due to the second-order nonlinearity effects, the relevant quadratic term must be accurately compensated to guarantee the accuracy of the electrostatic accelerometer. In this paper, three sources of the quadratic term are studied and formulated. They are the offset of the test mass in the housing due to the bias of the capacitive position transducer, the asymmetry of the electrode area, and the asymmetry of the actuation electronics. Two feasible compensation methods and an identification means are proposed. Compensation is achieved by adjusting the test mass actual working position or the asymmetry factor of the feedback actuation voltage. Identification is conducted by applying a periodic high frequency signal on the electrodes. Finally, the proposed methods are demonstrated, in view of future space applications, by suspending the accelerometer test mass on a torsion pendulum.Keywords
Funding Information
- National Natural Science Foundation of China (11605064, 11775085, 11727814)
This publication has 10 references indexed in Scilit:
- Testing the equivalence principle in space after the MICROSCOPE missionPhysical Review D, 2018
- Research and Development of Electrostatic Accelerometers for Space Science Missions at HUSTSensors, 2017
- Self-calibration method of the bias of a space electrostatic accelerometerReview of Scientific Instruments, 2016
- TianQin: a space-borne gravitational wave detectorClassical and Quantum Gravity, 2016
- Identification and adjustment of the position and attitude for the electrostatic accelerometer's proof massSensors and Actuators A: Physical, 2012
- GOCE level 1b data processingJournal of Geodesy, 2011
- CHAMP, GRACE, GOCE Instruments and Beyond2011
- Performance measurements of an inertial sensor with a two-stage controlled torsion pendulumClassical and Quantum Gravity, 2010
- Seismic noise limit for ground-based performance measurements of an inertial sensor using a torsion balanceClassical and Quantum Gravity, 2010
- Revised electrostatic model of the LISA Pathfinder inertial sensorJournal of Physics: Conference Series, 2009