Influences of Silica Fume on Compressive Strength and Chemical Resistances of High Calcium Fly Ash-Based Alkali-Activated Mortar
Open Access
- 24 February 2022
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 14 (5) , 2652
Abstract
Although elevated temperature curing can increase the compressive strength of alkali-activated mortar, its field applications are still limited. In this study, alkali-activated mortars were prepared using high calcium fly ash (FA) as a precursor. Small amounts of silica fume were used to partially replace high calcium fly ash at 3–9% by weight to increase the strength of alkali-activated mortar. All mixtures had a liquid to binder ratio of 0.60 and sand to binder ratio of 2.75 by weight. A ratio of NaOH to Na2SiO3 solution was kept at 2:1 by weight. Mortar flow was also held between 105–115 using a superplasticizer. Compressive strength and durability were investigated in terms of acid and sulfate resistance. The effects of silica fume addition and curing temperature on compressive strength were found to be significant. The optimum content of silica fume was 6%, providing compressive strength as high as that of alkali-activated mortars cured at 45 °C. The weight loss of alkali-activated mortar due to sulfuric acid attack decreased with increasing silica fume content and curing temperature. All alkali-activated mortars were found to have a better performance than (ordinary) Portland cement (OPC) mortars and mortars containing 40% FA. Alkali-activated mortars immersed in magnesium sulfate solutions had compressive strength that decreased with an increase in curing temperature. The expansion of alkali-activated mortar due to sodium sulfate attack increased with increasing silica fume content, and the expansion decreased with increased curing temperature. All alkali-activated mortars performed better than OPC mortars after 98 days of sulfate attack.Keywords
This publication has 41 references indexed in Scilit:
- Thermal Character of Geopolymers Synthesized from Class F Fly Ash Containing High Concentrations of Iron and α‐QuartzInternational Journal of Applied Ceramic Technology, 2010
- CO2 Capture Technologies for Cement IndustryEnergy Procedia, 2009
- Formation of Ettringite from Monosubstituted Calcium Sulfoaluminate Hydrate and GypsumJournal of the American Ceramic Society, 1999
- Alkali-activated fly ashesCement and Concrete Research, 1999
- The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applicationsMinerals Engineering, 1997
- Rice-husk ash paste and concrete: Some aspects of hydration and the microstructure of the interfacial zone between the aggregate and pasteCement and Concrete Research, 1996
- Sulfate attack on concrete with mineral admixturesCement and Concrete Research, 1996
- Magnesium sulfate attack on portland cement paste — II. Chemical and mineralogical analysesCement and Concrete Research, 1992
- Magnesium sulfate attack on portland cement paste-I. Microstructural analysisCement and Concrete Research, 1992
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991