Fabrication of Textured Ti2AlC-MAX Phase Ceramic by Slip Casting under Strong Magnetic Field and Spark Plasma Sintering, and Its Crystal Orientation Dependence of Room Temperature Deformation Behavior
Authors:
Open Access
- 15 July 2024
- journal article
- research article
- Published by Japan Society of Powder and Powder Metallurgy in Journal of the Japan Society of Powder and Powder Metallurgy
- Vol. 71 (7) , 257-262
Abstract
The properties of MAX phase ceramics that possess metallic and ceramic nature are anisotropic because of their hexagonal and layered crystal structure. Slip casting under a strong magnetic field followed by spark plasm sintering is one of the methods to control the orientation of the MAX phase ceramics. In this study, first, the textured Ti2AlC-MAX phase was fabricated by slip cast under 12 T, where the direction of magnetic field was fixed to the slip cast direction after clarifying the easily magnetizable axis of Ti2AlC. Second, the crystal orientation dependence of the room temperature deformation behavior was investigated by the Vickers hardness test from various orientations. It was found that the easily magnetizable axis of Ti2AlC was the c-axis and the textured body could be obtained by applying the magnetic field from one direction. In the room temperature deformation, Vickers indents show an anisotropic shape and the hardness changed depending on the loading direction against the c-axis due to different deformation modes such as kink deformation and slip deformation. For 0°, since the slip deformation was unlikely to occur, linear crack growth was observed to form from the indent. For 45°, on the other hand, since the slip deformation occurred relatively easily, the crack growth was suppressed through the stress relaxation due to the slip deformation. For 90°, although the slip deformation is unlikely to occur similar to 0°, the crack propagation was suppressed through pile-up due to kink deformations along the c-axis. It can be concluded that kink deformation prevents crack propagation and increases the fracture toughness of the textured Ti2AlC-MAX phase.Keywords
This publication has 24 references indexed in Scilit:
- Effect of grain orientation on the compressive response of highly oriented MAX phase Ti3SiC2Materials Science and Engineering: A, 2021
- Full strength and toughness recovery after repeated cracking and healing in bone-like high temperature ceramicsScientific Reports, 2020
- Mechanical properties and microstructure evolution of Ti2AlC under compression in 25–1100 °C temperature rangeActa Materialia, 2020
- Tailoring Ti3AlC2 ceramic with high anisotropic physical and mechanical propertiesJournal of the European Ceramic Society, 2015
- Shell-like nanolayered Nb4AlC3 ceramic with high strength and toughnessScripta Materialia, 2011
- Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a ReviewJournal of Materials Science & Technology, 2010
- Oxidation-induced crack healing in Ti3AlC2 ceramicsScripta Materialia, 2008
- The MN+1AXN phases: A new class of solidsProgress in Solid State Chemistry, 2000
- Layered machinable ceramics for high temperature applicationsScripta Materialia, 1997
- Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures—IJournal of Inorganic and Nuclear Chemistry, 1959