CFD Analysis of Flow through a Gerotor Oil Pump
Authors:
- 12 April 2010
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Increasing the efficiency of engine auxiliary systems have become a challenge. Oil pump, identified for this study, is one such engine system which is used for lubrication of engine parts. To achieve higher efficiencies, there is a need for math-based analysis and design. This can be achieved by means of Computational Fluid Dynamics (CFD). The main aim of this paper is to simulate the flow through Gerotor Oil pump using Computational Fluid Dynamics. A 3D model of the entire flow domain is created and meshed in preprocessor GAMBIT. The mesh for various pressure outlet conditions is exported to FLUENT solver for analysis. The predicted results are validated with the experimental results. The comparison shows that the CFD predictions are in good agreement with experimental results. In particular, such a simulation offers a scope for visualizing the flow through the Gerotor oil pump.Keywords
This publication has 11 references indexed in Scilit:
- Gerotor Oil Pump Performance and Flow/Pressure Ripple StudySAE International Journal of Advances and Current Practices in Mobility, 2006
- Numerical Simulation of Cover Plate Deflection in the Gerotor PumpSAE International Journal of Advances and Current Practices in Mobility, 2005
- Flow Ripple in a Gerotor PumpSAE International Journal of Advances and Current Practices in Mobility, 2002
- Hydraulic Steering Pump Cavity Flow CFD Simulation to Improve NVH PerformanceSAE International Journal of Advances and Current Practices in Mobility, 2001
- Modelling and Simulation of Gerotor Gearing in Lubricating Oil PumpsSAE International Journal of Advances and Current Practices in Mobility, 1999
- Gerotor Lubricating Oil Pump for IC EnginesSAE International Journal of Advances and Current Practices in Mobility, 1998
- Two-dimensional incompressible Navier-Stokes calculations in complex-shaped moving domains1998
- Development of Modern Engine Lubrication SystemsSAE International Journal of Advances and Current Practices in Mobility, 1997
- Computational Analysis of Oil Pumps with an Implicit Pressure Based Method Using Unstructured Mixed Element GridsSAE International Journal of Advances and Current Practices in Mobility, 1996
- Dynamic Fluid Flow Analysis of Oil PumpsSAE International Journal of Advances and Current Practices in Mobility, 1996