Magnesium production by molten salt electrolysis with liquid tin cathode and multiple effect distillation
Authors:
Open Access
- 3 July 2023
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 11, 1192202
Abstract
Low-cost clean primary production of magnesium metal is important for its use in many applications, from light-weight structural components to energy technologies. This work describes new experiments and cost and emissions analysis for a magnesium metal production process. The process combines molten salt electrolysis of MgO using MgF₂-CaF₂ electrolyte and a reactive liquid tin cathode, with gravity-driven multiple effect thermal system (G-METS) distillation to separate out the magnesium product, and re-use of the tin. Electrolysis experiments with carbon anodes showed current yield above 90%, while a yttria-stabilized zirconia solid oxide membrane (SOM) anode experiment showed 84% current yield. G-METS distillation is an important component of the envisioned process. It can potentially lower costs and energy use considerably compared with conventional magnesium distillation. Techno-economic analysis including detailed mass and energy balances shows that this electrolyte composition could lower costs by utilizing CaO, which is the primary impurity in MgO, as the Hall-Héroult process uses the sodium impurity in alumina. Analysis options include: raw material types (magnesite rock vs. brine or seawater), drying and calcining using electricity vs. natural gas, and carbon vs. SOM anode type. Using SOM inert anodes results in a cost premium around 10%–15%, mostly due to higher electrical energy usage resulting from membrane resistance, and reduces GHG emissions by approximately 1 kg CO₂/kg Mg product. Capital and operating cost estimates, and cradle to gate greenhouse gas (GHG) emissions analysis under several raw material and process technology scenarios, show comparable costs and emissions to those of aluminum production.Keywords
Funding Information
- National Science Foundation
- U.S. Department of Energy
This publication has 23 references indexed in Scilit:
- Applicability of the Electrochemical Oxygen Sensor for In-Situ Evaluation of MgO Solubility in the MgF2–LiF Molten Salt Electrolysis SystemMetals, 2020
- Recyclable metal fuels for clean and compact zero-carbon powerProgress in Energy and Combustion Science, 2018
- Periodic Shorting of SOM Cell to Remove Soluble Magnesium in Molten Flux and Improve Faradaic EfficiencyMetallurgical and Materials Transactions B, 2014
- Mitigating Electronic Current in Molten Flux for the Magnesium SOM ProcessMetallurgical and Materials Transactions B, 2014
- Determining Yttria‐Stabilized Zirconia ( YSZ ) Stability in Molten Oxy‐Fluoride Flux for the Production of Magnesium with the SOM ProcessJournal of the American Ceramic Society, 2013
- LCA of magnesium productionResources, Conservation and Recycling, 2008
- The use of solid-oxide-membrane technology for electrometallurgyJOM, 2007
- Solid oxide membrane process for magnesium production directly from magnesium oxideMetallurgical and Materials Transactions B, 2005
- The Paths and Strategies for Increased Magnesium Applications in VehiclesMaterials Science Forum, 2005
- Solubility of alumina in cryolite melts: Measurements and modeling at 1300 KMetallurgical and Materials Transactions B, 2003