Long-term efficiency of silica fume and fly ash to suppress ASR in field structures
Open Access
- 25 April 2022
- journal article
- conference paper
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 72 (346) , e285
Abstract
The potential of ASR in concrete can be assessed by the concrete prism test. However, the transferability of the results obtained with accelerated tests to concrete behavior under field conditions has to be validated. Such a validation was performed ten years ago for concrete produced with Portland cement and various Swiss aggregates. In recent years, the use of supplementary cementitious materials (SCM) has increased. So far, no validation for such types of concrete has been conducted in Switzerland. The goal of the current project is to fill this gap and provide the missing validation. Eight structures where chosen for the investigation. In all of them concrete containing SCM was used and the results of the concrete prism test at time of construction were available. In general, the results of the concrete prism test correlate with the degree of damage in the structures assessed by the analysis of the microstructure.Keywords
This publication has 5 references indexed in Scilit:
- Moisture stability of crystalline alkali-silica reaction products formed in concrete exposed to natural environmentMaterials & Design, 2020
- An attempt to validate the ultra-accelerated microbar and the concrete performance test with the degree of AAR-induced damage observed in concrete structuresCement and Concrete Research, 2013
- Effect of environmental conditions on expansion in concrete due to alkali–silica reaction (ASR)Materials Characterization, 2009
- Test methods for evaluating preventive measures for controlling expansion due to alkali–silica reaction in concreteCement and Concrete Research, 2006
- Composition of alkali silica gel and ettringite in concrete railroad ties: SEM-EDX and X-ray diffraction analysesCement and Concrete Research, 1996