A comparative study of the accuracy of five CAD-CAM systems
Authors:
Open Access
- 15 January 2019
- journal article
- Published by Clujul Medical in Medicine and Pharmacy Reports
- Vol. 92 (2) , 185-191
Abstract
Background and aims. The study aims at comparing the precision of different CAD/CAM systems: original systems built by the same manufacturer as opposed to systems whose components are built by different manufacturers. Methods. We used the same physical cast which was scanned with five different scanners. The design of the PMMA copings was done by the same operator for the five virtual casts. Each coping was milled three times by each milling machine, thus obtaining 75 copings. The internal space was analyzed by scanning the replicas in light body silicone. Results. The results analyzed the vertical marginal space (VMS) at the preparation limit, the axial internal space (AIS) and the internal occlusal space (IOS). For VMS the best results were obtained for scanner no 5 (S5) and milling machine 3 (M3). For AIS the best results were obtained with S4 and M3 combination. For IOS the best results were obtained with S45 and M3 combination. Conclusions. According to the results of the study, we are able to confirm the working hypothesis by stating the following conclusions: the quality of the prosthetic elements obtained through CAD/CAM processing differs depending on the CAD/CAM system used and is influenced by each component of every system individually, both the scanner and the milling unit; changing/switching any component of the CAD/CAM system has an impact on the quality of the resulting prosthetic work, but in an unpredictable manner.Keywords
This publication has 14 references indexed in Scilit:
- Accuracy and Reliability of Methods to Measure Marginal Adaptation of Crowns and FDPs: A Literature ReviewJournal of Prosthodontics, 2013
- Influence of CAD/CAM systems and cement selection on marginal discrepancy of zirconia-based ceramic crowns.2012
- CAD/CAM Dental technology.2011
- Clinical marginal and internal gaps of zirconia all-ceramic crownsJournal of Prosthodontic Research, 2011
- A systematic review of the clinical performance of CAD/CAM single-tooth restorations.2010
- Comparative analysis of two measurement methods for marginal fit in metal-ceramic and zirconia posterior FPDs.2009
- Digital dentistry: an overview of recent developments for CAD/CAM generated restorationsBritish Dental Journal, 2008
- Clinical fit of all‐ceramic three‐unit fixed partial dentures, generated with three different CAD/CAM systemsEuropean Journal of Oral Sciences, 2005
- Precision of a CAD/CAM technique for the production of zirconium dioxide copings.2004
- Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system.2001