Experimental Investigation of the Effect of Graphene/Water Nanofluid on the Heat Transfer of a Shell-and-Tube Heat Exchanger
Open Access
- 2 March 2023
- journal article
- research article
- Published by Wiley in International Journal of Energy Research
- Vol. 2023, 1-16
Abstract
The most common type of heat exchanger used in a variety of industrial applications is the shell-and-tube heat exchanger (STHE). In this work, the impact of graphene nanoplate (GNP)/water nanofluids at 0.01wt., 0.03wt., and 0.06wt. on the thermal efficiency, thermal performance factor, pressure drop, overall heat transfer, convective heat transfer coefficient (CVHTC), and heat transfer characteristics of a shell-and-tube heat exchanger was examined. For these experiments, a new STHE was designed and built. The novelty of this study is the use of GNPs/water nanofluids in this new STHE for the first time and the fully experimental investigation of the attributes of nanofluids. GNP properties were analysed and confirmed using analyses including XRD and TEM. Zeta potential, DLS, and camera images were used to examine the stability of nanofluids at various periods. The zeta potential of the nanofluids was lower than -27.8mV, confirming the good stability of GNP/water nanofluids. The results illustrated that the experimental data for distilled water had a reasonably good agreement with Sieder-Tate correlation. The maximum enhancement in the CVHTC of nanofluid with 0.06wt. of GNP, was equal to 910 (W/m2K), an increase of 22.47. Also, the efficiency of the heat exchanger for nanofluid at 0.06wt. improved by 8.88 compared with that of the base fluid. The heat transfer rate of the nanofluid at maximum concentration and volume flow rate was 3915 (J/kg.K), an improvement of 15.65 over the base fluid. The pressure drops increased as the flow rate and concentration of the nanofluid increased. Although increasing the pressure drop in tubes would increase the CVHTC, it would also increase the power consumption of the pump. In conclusion, nanofluid at 0.06wt. had good performance.Keywords
This publication has 49 references indexed in Scilit:
- Experimental Study of Heat Transfer of a Car Radiator with CuO/Ethylene Glycol-Water as a CoolantJournal of Dispersion Science and Technology, 2014
- Convective heat transfer enhancement of graphene nanofluids in shell and tube heat exchangerExperimental Thermal and Fluid Science, 2014
- Synthesis of magnetite nanoparticles by high energy ball millingApplied Surface Science, 2013
- Nanoparticles by Laser AblationCritical Reviews in Solid State and Materials Sciences, 2010
- Heat transfer of nanofluids in a shell and tube heat exchangerInternational Journal of Heat and Mass Transfer, 2010
- The Role of Interfacial Layers in the Enhanced Thermal Conductivity of Nanofluids: A Renovated Maxwell ModelJournal of Nanoparticle Research, 2003
- Conceptions for heat transfer correlation of nanofluidsInternational Journal of Heat and Mass Transfer, 2000
- HYDRODYNAMIC AND HEAT TRANSFER STUDY OF DISPERSED FLUIDS WITH SUBMICRON METALLIC OXIDE PARTICLESExperimental Heat Transfer, 1998
- The Viscosity of Concentrated Suspensions and SolutionsThe Journal of Chemical Physics, 1952
- Heat Transfer and Pressure Drop of Liquids in TubesIndustrial & Engineering Chemistry, 1936