Deep Learning-driven Automatic Estimation of Smartphone Installation Angles for Vehicle Navigation
Authors:
- 24 April 2023
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 137-142
Abstract
Currently, smartphones are the first choice for vehicle navigation. Due to the low quality of its embedded Inertial Measurement Unit (IMU), some self-constrained technologies have been developed to reduce the divergence of error in GNSS-denied areas, such as Zero Velocity Update (ZUPT) and Non-Holonomic Constraints (NHC). Their rear wheels are considered as the active position of NHC, while smartphones are usually installed on a holder in the front of the vehicle to guide drivers. To ensure the effectiveness of NHC, there is an urgent need to calibrate the lever arms and the installation angles between the smartphone and the previously mentioned active position. The lever arm is relatively stable under most situations since the position of the phone holder in the vehicle is usually fixed, which can be measured by a tape measure or estimated by the parameters of the car directly. The installation angle is difficult to be accurately measured and it may change every time we install the smartphone into the holder. Excluding the roll angle that does not affect the validity of NHC, an automatic estimation algorithm of the pitch and heading installation angles is needed. In this paper, we proposed a deep learning-driven automatic estimation of smartphone installation angles to enhance the performance of smartphone-based vehicle navigation in GNSS-denied areas. In the first step, an Extended Kalman Filter (EKF) is used to integrate GNSS/IMU/Barometer/DeepOdometry to provide accurate positions and attitudes. Simultaneously, the data of IMU and barometer are input into the trained deep learning network to output the predicted positions with the attitudes obtained from the integrated system. Then, the installation angles are estimated as states in another EKF by differing the predicted positions and the integrated positions. Extensive experiments show that our proposed method can estimate pitch and heading installation angles in deviation within 1 degree.Keywords
This publication has 14 references indexed in Scilit:
- Low-Cost IMU Error Intercorrection Method for Verticality MeasurementIEEE Transactions on Instrumentation and Measurement, 2021
- Vehicle Localization During GPS Outages With Extended Kalman Filter and Deep LearningIEEE Transactions on Instrumentation and Measurement, 2021
- Mounting Parameter Estimation From Velocity Vector Observations for Land Vehicle NavigationIEEE Transactions on Industrial Electronics, 2021
- Required Lever Arm Accuracy of Non-Holonomic Constraint for Land Vehicle NavigationIEEE Transactions on Vehicular Technology, 2020
- A New DGNSS Positioning Infrastructure for Android SmartphonesSensors, 2020
- HiMeter: Telling You the Height Rather than the AltitudeSensors, 2018
- Laser-Aided INS and Odometer Navigation System for Subway Track Irregularity MeasurementJournal of Surveying Engineering, 2017
- IMU-Based Smartphone-to-Vehicle PositioningIEEE Transactions on Intelligent Vehicles, 2016
- Civilian Vehicle Navigation: Required Alignment of the Inertial Sensors for Acceptable Navigation AccuraciesIEEE Transactions on Vehicular Technology, 2008
- An Accurate Land-Vehicle MEMS IMU/GPS Navigation System Using 3D Auxiliary Velocity UpdatesNAVIGATION: Journal of the Institute of Navigation, 2007