Cutting thick aluminum plates using laser fusion cutting enhanced by dynamic beam shaping
Open Access
- 1 November 2023
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 35 (4)
Abstract
Cutting thick plates is affected not only by the laser power but also by the cut kerf width and the melt flow dynamics that determine the ejection of the molten material. Employing the same laser beam intensity distribution for various thicknesses is the limiting factor when cutting thicker plates. This paper investigates fiber laser fusion cutting of 25 mm thick aluminum with dynamic beam shaping (DBS). While both static and longitudinal dynamic intensity distributions fail to cut this thickness with a 4 kW laser power, a cut through is achieved using annular and elliptical intensity distributions. However, an improvement of 45% in cutting speed can be achieved using an elliptical intensity distribution compared to an annular one. In order to understand the effect of the beam shape, an infrared thermal camera is used to study lateral heat propagation when using different process parameters. Moreover, to analyze the melt flow when changing the DBS frequency, high-speed imaging is utilized to observe the molten material inside the cut kerf. Finally, the cut edge quality is investigated for different cutting conditions.Keywords
This publication has 19 references indexed in Scilit:
- Improvement of Laser Beam Fusion Cutting of Mild and Stainless Steel Due to Longitudinal, Linear Beam OscillationApplied Sciences, 2020
- Laser Cutting with annular intensity distributionProcedia CIRP, 2020
- Laser cutting of aluminum alloy Al-2024-T3Procedia Manufacturing, 2017
- Relationship between temperature at cut front edge and kerf quality in fiber laser cutting of Al–Cu aluminum alloyInternational Journal of Machine Tools and Manufacture, 2016
- Transient beam oscillation with a highly dynamic scanner for laser beam fusion cuttingAdvanced Optical Technologies, 2016
- Laser cutting of thick steel plates and simulated steel components using a 30 kW fiber laserJournal of Nuclear Science and Technology, 2015
- Industrial grade 100 kW power CW fiber laser2013
- The Role of the Assist Gas Nature in Laser Cutting of Aluminum AlloysPhysics Procedia, 2011
- Inert gas cutting of thick-section stainless steel and medium-section aluminum using a high power fiber laserJournal of Laser Applications, 2009
- An investigation of quality in CO2 laser cutting of aluminumCIRP Journal of Manufacturing Science and Technology, 2009