Comparison of 304 SS, 2205 SS, and 410 SS Corrosion by Sulfate-Reducing Desulfovibrio ferrophilus
Open Access
- 17 June 2021
- journal article
- research article
- Published by Wiley in Journal of Chemistry
- Vol. 2021, 1-10
Abstract
Three types of stainless steel (304 SS, 410 SS, and 2205 SS) were evaluated for their corrosion behaviors in microbiologically influenced corrosion (MIC) by Desulfovibrio ferrophilus strain IS5, a relatively new and very corrosive sulfate-reducing bacteria (SRB) strain. The incubation lasted for 7 days in enriched artificial seawater at 28C and the results showed that 410 SS had a rather large weight loss (6.2mg/cm2) and a maximum pit depth (118µm), but 2205 SS and 304 SS did not suffer from significant weight loss or pitting. Electrochemical tests indicated that 2205 SS was slightly more resistant to SRB MIC than 304 SS, while 410 SS was far less resistant.Keywords
Funding Information
- Saudi Aramco (2018YFF0215002)
- PTTEP (2018YFF0215002)
- National Key Research and Development Program of China (2018YFF0215002)
- Ministry of Education of the People's Republic of China (2018YFF0215002)
- Foundation of Hubei Key Laboratory of Materials Chemistry and Service Failure (2018YFF0215002)
This publication has 33 references indexed in Scilit:
- Microstructure Characteristics and Corrosion Resistance of Friction Stir Welded 2205 Duplex Stainless SteelAdvances in Materials Science and Engineering, 2021
- The performance and mechanism of bifunctional biocide sodium pyrithione against sulfate reducing bacteria in X80 carbon steel corrosionCorrosion Science, 2019
- Synergistic effect of temperature and HCl concentration on the degradation of AISI 410 stainless steelCorrosion Science, 2017
- Corrosion behavior of cold rolled steel in artificial seawater in the presence of Bacillus subtilis C2Corrosion Science, 2015
- Inhibition effect of thiobacillus denitrificans on the corrosion of X70 pipeline steel caused by sulfate-reducing bacteria in crude petroleumMaterials and Corrosion, 2014
- Kinetics of Pitting Dissolution of Austenitic Stainless Steel 304 in Sodium Chloride SolutionISRN Corrosion, 2012
- Effects of pH and dissolved oxygen on electrochemical behavior and oxide films of 304SS in borated and lithiated high temperature waterCorrosion Science, 2012
- Characterization of microstructure, mechanical properties and corrosion resistance of dissimilar welded joint between 2205 duplex stainless steel and 16MnRMaterials & Design (1980-2015), 2011
- LABORATORY AND FIELD EXPERIENCE ON THE USE OF STAINLESS STEEL TO IMPROVE DURABILITY OF REINFORCED CONCRETECorrosion Reviews, 2002
- Corrosion behavior of 2205 duplex stainless steelAmerican Journal of Orthodontics and Dentofacial Orthopedics, 1997