Effect of build location on microstructural characteristics and corrosion behavior of EB-PBF built Alloy 718
Open Access
- 6 January 2020
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 106 (7-8) , 3597-3607
Abstract
Electron beam-powder bed fusion (EB-PBF), a high-temperature additive manufacturing (AM) technique, shows great promise in the production of high-quality metallic parts in different applications such as the aerospace industry. To achieve a higher build efficiency, it is ideal to build multiple parts together with as low spacing as possible between the respective parts. In the EB-PBF technique, there are many unknown variations in microstructural characteristics and functional performance that could be induced as a result of the location of the parts on the build plate, gaps between the parts and part geometry, etc. In the present study, the variations in the microstructure and corrosion performance as a function of the parts location on the build plate in the EB-PBF process were investigated. The microstructural features were correlated with the thermal history of the samples built in different locations on the build plate, including exterior (the outermost), middle (between the outermost and innermost), and interior (the innermost) regions. The cubic coupons located in the exterior regions showed increased level (~ 20 %) of defects (mainly in the form of shrinkage pores) and lower level (~ 30-35 %) of Nb-rich phase fraction due to their higher cooling rates compared to the interior and middle samples. Electrochemical investigations showed that the location indirectly had a substantial influence on the corrosion behavior, verified by a significant increase in polarization resistance (Rp) from the exterior (2.1 ± 0.3 kΩ.cm2) to interior regions (39.2 ± 4.1 kΩ.cm2).Keywords
Funding Information
- University West
This publication has 37 references indexed in Scilit:
- Additive manufacturing: A framework for implementationInternational Journal of Production Economics, 2014
- Influence of surface modifications on pitting corrosion behavior of nickel-base alloy 718. Part 1: Effect of machine hammer peeningCorrosion Science, 2013
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and locationMaterials Science and Engineering: A, 2013
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), part 1: Distance from build plate and part sizeMaterials Science and Engineering: A, 2013
- Effect of self-passivation on the electrochemical and corrosion behaviour of alloy C-22 in NaCl solutionsCorrosion Science, 2012
- Segregation and diffusion behavior of niobium in a highly alloyed nickel-base superalloyTransactions of Nonferrous Metals Society of China, 2011
- Theoretical investigation of the evolution of the passive state on Alloy 22 in acidified, saturated brine under open circuit conditionsElectrochimica Acta, 2011
- Effect of Grain Size on Corrosion: A ReviewCorrosion, 2010
- Prediction of Shrinkage Pore Volume Fraction Using a Dimensionless Niyama CriterionMetallurgical and Materials Transactions A, 2008
- Investigations of MX and γ′/γ″ precipitates in the nickel-based superalloy 718 produced by electron beam meltingMaterials Science and Engineering: A, 2008