Crystallization of polyamide 56/polyamide 66 blends: Non‐isothermal crystallization kinetics
- 9 March 2018
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 135 (26)
Abstract
The non‐isothermal crystallization behaviors of PA56, PA66, and PA56/PA66 blends were studied by differential scanning calorimetry. The Jeziorny and Mo's methods were used to analyze their non‐isothermal crystallization kinetics. The results indicated that Mo's method was better to describe the experimental data in this work. The crystallization rate of PA56 was much slower than that of PA66. The crystallization rate of PA56/PA66 blend was speeded up significantly with the increasing PA66 content when the PA66 content was less than 30 wt %. Further increase in the PA66 content only leads to relatively less increase of the crystallization rate in the PA56/PA66 blends. Activation energies have been determined with Friedman method. The activation energy of PA56/PA66 blends is decreased and lower than that of PA56. PA66 may play a role of nucleating agent toward PA56 to make it crystallize more easily in PA56/PA66 blends. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46409.Keywords
Funding Information
- National Key Technology R&D Program of China (2015BAE07B01)
- Beijing Training Project for the Leading Talents in S&T (LJ201424)
This publication has 32 references indexed in Scilit:
- Amide-based oligomers for low-viscosity composites of polyamide 66Macromolecular Research, 2017
- Understanding the crystallization behavior of polyamide 6/polyamide 66 alloys from the perspective of hydrogen bonds: projection moving-window 2D correlation FTIR spectroscopy and the enthalpyRSC Advances, 2016
- Reactive compatibilization of polyetherimide with polyamide 6,6: Part 2. Effect of epoxy-functionalized polyamidePolymer Bulletin, 2016
- Reactive compatibilization of polyetherimide with polyamide 6,6: part 1. Effect of functionalizing polyetherimidePolymer Bulletin, 2015
- Synchrotron Radiation Studies on Even-Odd and Odd-Even NylonsIOP Conference Series: Materials Science and Engineering, 2010
- Brill transition and melt crystallization of nylon 56: An odd–even polyamide with two hydrogen-bonding directionsPolymer, 2010
- Friction and wear mechanisms of PA66/PPS blend reinforced with carbon fiberJournal of Applied Polymer Science, 2007
- Clay locked phase morphology in the PPS/PA66/clay blends during compounding in an internal mixerPolymer, 2006
- Crystallization and Melting of Binary Mixtures of Nylon 6 and Nylon 66. A Study by DSCPolymer Journal, 1999
- Crystal Structures of Nylon 5,6. A Model with Two Hydrogen Bond Directions for Nylons Derived from Odd DiaminesMacromolecules, 1998