Behavior and Modeling of Wood-Pegged Timber Frames

Authors:

Abstract
Traditional timber connections with wood pegs are encountered in the renovation and rehabilitation of historic wood structures and in the construction of new structures where rustic appearance and traditional methods are desired. This study examined four types of traditional connections: mortise and tenon, mortise and tenon with a shoulder, mortise and tenon with a shoulder and a knee brace, and fork and tongue. A total of 60 specimens, primarily white oak and Douglas fir, were tested. About a quarter of the specimens were assembled and allowed to season under simulated in-service load. All specimens were tested under simulated gravity load up to failure or to about five times typical design load. Some knee-braced specimens were retested to simulate lateral loads. Test results showed that joint behavior is primarily linear. A tightly fitting joint carries load with less peg damage than a loose joint allows. A mortise and tenon with a shoulder performs better than a mortise and tenon or a fork and tongue. ...

This publication has 1 reference indexed in Scilit: