Experimental Study of the Dynamic and Static Compression Mechanical Properties of Closed-Cell PVC Foams
Open Access
Abstract
Closed-cell polyvinyl chloride foam (PVC) possesses many advantages, including its light weight, moisture protection, high specific strength, high specific stiffness, and low thermal conductivity, and is widely used as the core material in composite sandwich structures. It is increasingly used in fields with light weight requirements, such as shipbuilding and aerospace. Some of these structures can be affected by the action of dynamic loads during their lifespan, such as accidental or hostile blast loads as well as wind-loaded debris shocks. Examining the material properties of PVC foams under dynamic load is essential to predict the performance of foam sandwich designs. In this study, the compressive responses of a group of PVC foams with different densities were investigated under a broad range of quasi-static conditions and high strain rates using a universal testing machine and a lengthened Split Hopkinson press bar (SHPB) fabricated from titanium alloy. The results show that the mechanical properties of foam materials are related to their density and are strain rate-sensitive. The compressive strength and plateau stress of the foams were augmented with increased foam density. In the quasi-static strain rate range, the compressive strength of PVC foams at 10−1 s−1 was 27% higher than that at 10−4 s−1. With a strain rate of 1700 s−1, the strength was 107% higher than the quasi-static value at 10−4 s−1.Keywords
Funding Information
- Defense Industrial Technology Development Program (JCKY2018604B004, 11972007)
- National Natural Science Foundation of China (JCKY2018604B004, 11972007)
This publication has 28 references indexed in Scilit:
- Compressive properties of closed-cell polyvinyl chloride foams at low and high strain rates: Experimental investigation and critical review of state of the artComposites Part B: Engineering, 2013
- Effect of Processing Parameters and Vibrating Field on Poly(Vinyl Chloride) Microcellular Foam MorphologyPolymer-Plastics Technology and Engineering, 2009
- Compressive deformation and energy absorption characteristics of closed cell aluminum-fly ash particle composite foamMaterials Science and Engineering: A, 2009
- Effect of density, microstructure, and strain rate on compression behavior of polymeric foamsMaterials Science and Engineering: A, 2005
- An SHPB set-up with reduced time-shift and pressure bar lengthInternational Journal of Impact Engineering, 2003
- Strain rate effects on sandwich core materials: An experimental and analytical investigationActa Materialia, 2003
- Dynamic compression of cellular cores: temperature and strain rate effectsComposite Structures, 2002
- An innovative technique for measuring the high strain rate response of sandwich compositesComposite Structures, 2000
- Mechanics of cellular and other low-density materialsInternational Journal of Solids and Structures, 2000
- Mechanical Behavior of Foamed Materials Under Dynamic CompressionJournal of Cellular Plastics, 1974