FeS2‐Imbedded Mixed Conducting Matrix as a Solid Battery Cathode
- 6 June 2016
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 6 (15) , 1600495
Abstract
A new concept of pairing an active material and a mixed conductor is explored as a solid‐state battery electrode. By imbedding nano‐FeS2 domains into an amorphous LiTiS2 matrix, a hybrid power‐energy system is achieved while additionally improving upon many common solid electrode design flaws. High‐resolution transmission electron microscopy is used to probe the active material/mixed conductor interface over the course of cycling. Arguably the most beneficial development is enhancement of charge transfer, manifesting in a significantly increased exchange current as captured in a Tafel analysis. By developing a solution to active material isolation and creating a more homogenous electrode design, cycling at a high rate of C/2 for 500 cycles is obtained. Additionally, the electrode can recover full capacity simply by reducing system rate. Capacity recovery implicates a lack of active material isolation, a common problem in solid‐state batteries.Keywords
This publication has 54 references indexed in Scilit:
- Phase stability, electrochemical stability and ionic conductivity of the Li10±1MP2X12(M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductorsEnergy & Environmental Science, 2012
- A Highly Reversible Nano‐Si Anode Enabled by Mechanical Confinement in an Electrochemically Activated LixTi4Ni4Si7 MatrixAdvanced Energy Materials, 2012
- Silicone as a binder in composite electrolytesJournal of Power Sources, 2003
- Fabrications and properties of composite solid-state electrolytesSolid State Ionics, 2003
- Li+ Diffusion and Its Structural Basis in the Nanocrystalline and Amorphous Forms of Two-Dimensionally Ion-Conducting LixTiS2The Journal of Physical Chemistry B, 2001
- Dynamically compacted rechargeable ceramic lithium batteriesSolid State Ionics, 1996
- Experimental evidence of the interference between ionic and electronic flows in an oxide with prevailing electronic conductionSolid State Ionics, 1994
- Electrochemistry of Pyrite‐Based Cathodes for Ambient Temperature Lithium BatteriesJournal of the Electrochemical Society, 1989
- Electrochemical determination of the lithium ion diffusion coefficient in TiS2Solid State Ionics, 1981
- Chemical and electrochemical study of the LixFeS2 cathodic system (0 < x ⩽ 2)Materials Research Bulletin, 1980