Changes of structure and tilth mellowing in a Vertisol due to wet/dry cycles in the liquid and vapour phases
Authors:
- 1 September 1995
- journal article
- Published by Wiley in European Journal of Soil Science
- Vol. 46 (3) , 357-368
Abstract
Summary: Development of a fine tilth in Vertisols increases infiltration, plant‐available water and ease of cultivation and produces a fine seed bed. The tilth‐mellowing properties of a strongly self‐mulching Vertisol from Zimbabwe were investigated by applying different types of wetting to a worked soil and examining macromorphological features, size, density, strength and friability of the resulting clods/aggregates, developed through successive wet/dry cycles. Wetting regimes were chosen to simulate likely field conditions and included rapid flood‐, slow and fast capillary‐, simulated rainfall‐ and vapour‐wetting. Tilth development was compared to that of field soils. All wetting treatments in the liquid phase resulted in decreases in aggregate density. Fast capillary wetting rapidly reduced size and strength of aggregates to below that of field soils whereas slow capillary wetting similarly rapidly decreased size but reduced strength more slowly. Flood wetting caused little change in size but aggregates showed a small decrease in strength. Rainfall wetting resulted in changes intermediate between these extremes. There was a significant linear relationship between strength and porosity of aggregates! For rainfall‐ and flood‐wetting, friabilities were at a maximum after one wet/dry cycle but subsequently decreased. Vapour wet/dry cycles reduced strength but not density of worked soils, implying changes in internal microstructure without measurable porosity change. Hypotheses to explain these changes are put forward.Keywords
This publication has 27 references indexed in Scilit:
- Slaking characteristics of some Australian and British soilsEuropean Journal of Soil Science, 1994
- The indexing of self-mulching behavior in soilsSoil Research, 1994
- Structural collapse and strength of some Australian soils in relation to hard setting: II. Tensile strength of collapsed aggregatesEuropean Journal of Soil Science, 1994
- INFLUENCE OF AGGREGATE DIAMETER, SURFACE AREA AND ANTECEDENT WATER CONTENT ON THE DISPERSIBILITY OF CLAYCanadian Journal of Soil Science, 1990
- Laboratory simulation of the surface morphology of self-mulching and non-self-mulching vertisols .1. Materials, methods and preliminary resultsSoil Research, 1990
- The effect of wetting pre-treatment on the desorption moisture characteristic of vertisolsSoil Research, 1989
- Mellowing and anisotropy induced by wetting of moulded soil samplesSoil Research, 1985
- Methodology for determination of tensile strength of soil aggregatesJournal of Agricultural Engineering Research, 1985
- SOIL STRUCTURE IN VERTISOLS OF THE BLUE NILE CLAY PLAINS, SUDANEuropean Journal of Soil Science, 1969
- Representation of Soil Aggregate‐Size Distribution by a Logarithmic‐Normal DistributionSoil Science Society of America Journal, 1956