In Search of Governing Gas Flow Mechanism through Metal Solid Foams
Open Access
Abstract
Solid foams have been intensely studied as promising structured catalytic internals. However, mechanisms governing flow and transport phenomena within the foam structures have not been properly addressed in the literature. The aim of this study was to consider such flow mechanisms based on our experimental results on flow resistance. Two mechanisms were considered: developing laminar flow in a short capillary channel (flow-through model), and flow around an immersed solid body, either a cylinder or sphere (flow-around model). Flow resistance experiments were performed on three aluminum foams of 10, 20, and 40 PPI (pores per inch), using a 57 mm ID test column filled with the foams studied. The foam morphology was examined using microtomography and optical microscopy to derive the geometric parameters applied in the model equations. The flow-through model provided an accuracy of 25% for the experiments. The model channel diameter was the foam cell diameter, and the channel length was the strut thickness. The accuracy of the flow-around model was only slightly worse (35%). It was difficult to establish the geometry of the immersed solid body (sphere or cylinder) because experiment characteristics tended to change from sphere to cylinder with increasing PPI value.Keywords
This publication has 23 references indexed in Scilit:
- Comparison of geometrical, momentum and mass transfer characteristics of real foams to Kelvin cell lattices for catalyst applicationsInternational Journal of Heat and Mass Transfer, 2017
- Mass transport and kinetics in structured steel foam reactor with Cu-ZSM-5 catalyst for SCR of NOx with ammoniaCatalysis Today, 2013
- Predicting the Specific Surface Area and Pressure Drop of Reticulated Ceramic Foams Used as Catalyst SupportAdvanced Engineering Materials, 2011
- Determining the specific surface area of ceramic foams: The tetrakaidecahedra model revisitedChemical Engineering Science, 2011
- Morphological Characterization of Ceramic Sponges for Applications in Chemical EngineeringIndustrial & Engineering Chemistry Research, 2009
- Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porositiesChemical Engineering Science, 2008
- Pressure drop modeling on SOLID foam: State-of-the art correlationChemical Engineering Journal, 2008
- Open Celled Material Structural Properties Measurement: From Morphology To Transport PropertiesMATERIALS TRANSACTIONS, 2006
- Ceramic Foam Monoliths as Catalyst Carriers. 1. Adjustment and Description of the MorphologyIndustrial & Engineering Chemistry Research, 2003
- Thermophysical properties of high porosity metal foamsInternational Journal of Heat and Mass Transfer, 2002