Effect of Crossflow on Foam-Induced Diversion in Layered Formations
- 15 March 2005
- journal article
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 10 (01) , 54-65
Abstract
Summary: Foams have been widely used to control fluid mobility in improved oil recovery as well as in near-wellbore production enhancement operations, such as acid diversion. The efficiency of fluid blockage and diversion depends strongly on the geological layering of the formation and on the occurrence of (viscous and capillary) crossflow. However, these effects have not been studied in detail in the literature. In this paper, we report an experimental study of foam-induced fluid diversion in isolated and capillarycommunicating double-layer cores. Sodium dodecyl sulfate (SDS) surfactant was used at just above its critical micelle concentration. Natural rocks were used to manufacture concentric double-layer cores, having final permeability contrasts in the range of 10 to 200. We also used capillary-communicating double-layer cores, obtained by sintering two homogeneous glass-bead layers. In addition to pressure-drop monitoring, the in-situ fluid saturation was visualized using X-ray computerized tomography. A range of foam qualities has been investigated.Keywords
This publication has 26 references indexed in Scilit:
- Mobility of Foam in Heterogeneous Media: Flow Parallel and Perpendicular to StratificationSPE Journal, 2002
- Foam Generation at Layer Boundaries in Porous MediaSPE Journal, 1999
- Foam Flow in Heterogeneous Porous Media: Effect of Cross FlowSPE Journal, 1999
- Effect of Capillary Contact on CO2-Foam Mobility in Heterogeneous Core Samples1996
- Acid Diversion from an Undamaged to a Damaged Core Using Multiple Foam Slugs1995
- Applying Fractional-Flow Theory to Foam Processes at the "Limiting Capillary Pressure"SPE Advanced Technology Series, 1995
- Matrix Acidizing: A Novel Approach to Foam DiversionSPE Production & Facilities, 1994
- Laboratory Study Provides Guidelines for Diverting Acid With FoamSPE Production & Facilities, 1993
- Effect of Foams Used During Carbonate AcidizingSPE Production Engineering, 1992
- Energy-selective reconstructions in X-ray computerised tomographyPhysics in Medicine & Biology, 1976