Rejuvenating Viscous Oil Reservoirs by Polymer Injection: Lessons Learned in the Field
Authors:
- 2 July 2013
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Viscous oils have adverse mobility that causes production to decline rapidly following a period of primary recovery. Traditionally, enhanced oil recovery (EOR) for this kind of oil has mostly relied on reducing viscosity and increasing mobility using thermal methods or miscible gas injection. However, in some cases-for example, deep reservoirs, thin sands, or restricted offshore applications-these methods might not be feasible. This paper discusses published field studies using polymer flooding EOR for viscous oil and provides recommendations for its applicability. In countries with reservoirs that present challenges for use of traditional EOR methods, such as Canada, China, and Suriname, polymer flooding has been field tested as a reliable oil-sweeping method while minimizing the risk of high water cut. With oil viscosities at reservoir conditions up to 5000 cp and reasonable economic conditions, polymer flooding has been shown to be an attractive EOR alternative. The study cases presented show that polymer concentrations need only be between 800 to 1,500 ppm to ensure successful results. Concerns about low or poor injectivity of polymers are being overcome using fracturing and horizontal wells, while high-value, limited-space challenges on offshore platforms are being addressed through modular and minimized installations. Additionally, most conventional waterflood monitoring and surveillance techniques are also applicable to polymer floods, while polymer use in backflow tests and as a tracer has also been proposed. This study's projection shows a 90% probability of positive net present value (NPV) under broad ranges of uncertainty for oil price, recovery factor (RF), capital expenditures (CAPEX), and operational expenditures (OPEX). The results of this paper show that polymer flooding presents a clear and feasible alternative for increasing the RF of viscous oil. To this end, a detailed study is provided of its advantages and the reservoir condition range of applicability.Keywords
This publication has 17 references indexed in Scilit:
- Advances of Polymer Flood in Heavy Oil Recovery2011
- Pushing the Envelope for Polymer Flooding Towards High-temperature and High-salinity Reservoirs with Polyacrylamide Based Ter-polymers2011
- A Review of Polymer EOR on Offshore Heavy Oil Field in Bohai Bay, China2011
- Waterflooding Viscous Oil ReservoirsSPE Reservoir Evaluation & Engineering, 2009
- Key Technologies of Polymer Flooding in Offshore Oilfield of Bohai Bay2008
- Review of Practical Experience & Management by Polymer Flooding at Daqing2008
- Economics of Field Proven Chemical Flooding Technologies2008
- Polymer Flooding: A Sustainable Enhanced Oil Recovery in the Current Scenario2007
- Application of EOR Technology by Means of Polymer Flooding in Bohai Oil Fields2006
- Method for Laboratory and Field Evaluation of a Proposed Polymer FloodSPE Reservoir Engineering, 1987