Properties of Self-Consolidating Engineered Cementitious Composite Modified with Rubber
- 1 April 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (4)
Abstract
This study aims to investigate the feasibility of utilizing waste rubber as a partial replacement for silica sand in the development of self-consolidating engineered cementitious composite (SCECC). The effects of the percentage of rubber (0–50%), rubber size [crumb rubber (CR) and powder rubber (PR)], and supplementary cementing materials (SCMs) (fly ash, ground-granulated blast-furnace slag, silica fume, and metakaolin) on the fresh and hardened properties of SCECC were studied. The results indicated that both CR and PR had promising potentials to be more economical and environmentally friendly alternative aggregates to develop sustainable SCECC with higher ductility. Although the inclusion of CR negatively affected the fresh and mechanical properties of SCECC, a number of successful mixtures with up to 30% CR could be developed with strengths greater than 40 MPa. The addition of PR showed a better performance in terms of fresh and mechanical properties compared with CR, allowing up to 40% replacement of rubber to be safely used. The inclusion of CR appeared to continuously increase the deformation capacity of SCECC up to 20% replacement level, while PR continued to improve the deformation capacity up to 50% replacement. Combining PR and different SCMs, especially metakaolin, allowed higher percentages of rubber to be used, achieving semi-lightweight concrete with adequate mechanical properties for multiple structural applications.Keywords
This publication has 24 references indexed in Scilit:
- Development of green engineered cementitious composites using iron ore tailings as aggregatesConstruction and Building Materials, 2013
- Concrete made with recycled tire rubber: Effect of alkaline activation and silica fume additionJournal of Cleaner Production, 2011
- Engineered Cementitious CompositesTransportation Research Record: Journal of the Transportation Research Board, 2010
- Development of engineered cementitious composites with limestone powder and blast furnace slagMaterials and Structures, 2009
- Experimental investigation of some fresh and hardened properties of rubberized self-compacting concreteMaterials & Design (1980-2015), 2009
- Improving rubber concrete by waste organic sulfur compoundsWaste Management & Research: The Journal for a Sustainable Circular Economy, 2009
- Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slagCement and Concrete Research, 2007
- A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC)Cement and Concrete Composites, 2007
- Use of waste tire steel beads in Portland cement concreteCement and Concrete Research, 2006
- Development of a self-consolidating engineered cementitious composite employing electrosteric dispersion/stabilizationCement and Concrete Composites, 2003