Early Warning of AC Salt Fog Flashover on Composite Insulators Using Fiber Bragg Grating Sensing and Visible Arc Images
Open Access
- 16 October 2025
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 16 (10) , 1171
Abstract
External insulation of coastal power grids faces harsh conditions and is highly susceptible to flashover. Currently, technologies for online monitoring and flashover early warning are severely lacking. As a reflective passive sensing device, Fiber Bragg Grating (FBG) enables the monitoring of surface discharge and provides an early warning for flashover on external insulation. A 10 kV fiber-optic composite insulator was developed in this study. A linear relationship between the FBG central wavelength and interfacial temperature was established through temperature calibration experiments. Coastal salt fog conditions were simulated in an artificial fog chamber, where AC pollution flashover tests were performed on the fiber-optic composite insulator. FBG central wavelength and visible images of discharge were synchronously acquired during experimentation. Experimental results indicate that the interfacial locations on FBGs where the temperature increases during flashover coincide with the positions of visible discharge arcs, demonstrating the effectiveness of the monitoring method. A temperature rise rate of 4.88 × 10−2 °C/s was found to trigger flashover warning, while a rate of 4.96 × 10−2 °C/s initiated trip protection. A discharge-region ratio characteristic was proposed for visible discharge images based on highlight area ratio, R-channel deviation, and mean saturation features. This characteristic serves as a flashover warning when its value reaches 46.7%. This study provides a novel research approach for online monitoring and flashover early warning of external insulation in coastal salt fog environments.Keywords
Funding Information
- National Natural Science Foundation of China (52177142)
This publication has 19 references indexed in Scilit:
- Bending strain progression and damage of asphalt beams based on distributed fibre optic sensorsInternational Journal of Pavement Engineering, 2025
- A method for detecting conductive droplet deformation and flashover using interface temperature based on electrothermal synergistic mechanismElectric Power Systems Research, 2023
- Method of quasi-distributed interface fiber Bragg gratings monitoring dry band arc on the moist pollution layer of composite insulatorsElectric Power Systems Research, 2022
- Influence of humidity and contamination on the leakage current of 230-kV composite insulatorElectric Power Systems Research, 2021
- Insulator leakage current prediction using surface spark discharge data and particle swarm optimization based neural networkElectric Power Systems Research, 2021
- Effects of structure and material of polluted insulators on the wetting characteristicsIET Science, Measurement & Technology, 2019
- Flashover voltage of silicone insulating surface covered by water droplets under AC voltageElectric Power Systems Research, 2017
- Mechanism of contaminant accumulation and flashover of insulator in heavily polluted coastal areaIEEE Transactions on Dielectrics and Electrical Insulation, 2010
- Strain Measurement Using Embedded Fiber Bragg Grating Sensors Inside an Anchored Carbon Fiber Polymer Reinforcement Prestressing Rod for Structural MonitoringIEEE Sensors Journal, 2009
- Analyses of composite insulators with crimped end-fittings: Part I—non linear finite element computationsComposites Science and Technology, 2002