Analysis Study of Available Alternatives for Mitigation of Aromatic Hydrocarbon Emissions from a Glycol Dehydration Unit
Open Access
- 1 January 2024
- journal article
- research article
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2024 (1)
Abstract
A natural gas (NG) dehydration unit based on glycol absorption is considered one of the most important gas processing units, aiming to decrease water content and consequently adjust its dew point. However, during this process, not only water is absorbed by the glycol solvent, but also some aromatic compounds, including benzene, toluene, ethylbenzene, and xylene (BTEX), in addition to volatile organic compounds (VOC), are absorbed. These compounds are released during glycol regeneration into the atmosphere, resulting in environmental pollution and consequent catastrophic mental and physical health problems. This study aims to minimize BTEX emissions while ensuring efficient dew point control. Various strategies have been adopted to control BTEX emissions, but the present work focuses on optimizing operating conditions and investigating the influence of operational variables on BTEX emissions, as well as NG water content. LINGO optimization software and HYSYS (version 11) are used to find the plant’s optimum conditions for minimizing BTEX emissions and satisfying efficient dew point control. Simulation results show that stripping gas, triethylene glycol (TEG) circulation rate, and inlet feed gas temperature significantly affect BTEX emissions. The proposed optimum operating conditions in this work resulted in a reduction in BTEX emissions by about 81% while satisfying the required NG dew point. Furthermore, two quadratic equations are developed based on regression analysis for efficient calculation of the BTEX emissions and water dew point at any operational variables.Keywords
Funding Information
- Al-Imam Muhammad Ibn Saud Islamic University (IMSIU-RG23020)
This publication has 39 references indexed in Scilit:
- Development of supervised machine learning model for prediction of TEG regeneration performance in natural gas dehydrationChemical Papers, 2023
- Process modeling and analysis of a natural gas dehydration process using tri-ethylene glycol (TEG) via Symmetry2022
- Investigation of natural gas dehydration process using triethylene glycol (TEG) based on statistical approachChemical Papers, 2022
- A Novel Process Synthesis of a Dehydrating Unit of Domestic Natural Gas Using TEG Contactor and TEG Regenerator2022
- Technical and economic evaluation of triethylene glycol regeneration process using flash gas as stripping gas in a domestic natural gas dehydration unitEngineering Reports, 2020
- A Parametric Study of Different Recycling Configurations for the Natural Gas Dehydration Process Via Absorption Using Triethylene GlycolProcess Integration and Optimization for Sustainability, 2018
- A study to reduce atmospheric emissions of an existing natural gas dehydration plant using multiple thermodynamic modelsInternational Journal of Environmental Science and Technology, 2018
- Natural gas dehydration by desiccant materialsAlexandria Engineering Journal, 2011
- Design of Experiments in Chemical Engineering2004
- Use of Ambersorb® carbonaceous adsorbent for removal of BTEX compounds from oil‐field produced waterEnvironmental Progress, 1996