Atmospheric Corrosion of Cu during Constant Deposition of NaCl
Authors:
Open Access
- 9 May 2013
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 160 (8) , C336-C344
Abstract
A laboratory environment chamber with a constant deposition rate of NaCl was built. With this chamber, the corrosion behavior of Cu during constant NaCl deposition was investigated with different CO2 concentrations and ultraviolet (UV) illumination. XRD and coulometric reduction techniques were used to identify and quantify the corrosion products. An Na2CO3 solution was found to be more suitable than KCl solutions for quantification of Cu corrosion products. Cuprite was always the dominant corrosion product during exposure of Cu in various environments. UV illumination accelerated formation of cuprite significantly but had very little effect on formation of cupric corrosion product. CO2 in the environment was important in determination of cupric corrosion products. With 350 ppm CO2, paratacamite was the dominant product, while tenorite was dominant with 2. This explains why tenorite is not a common cupric corrosion product in the field. Pitting corrosion was always the dominant form of corrosion at the beginning of the exposure period but uniform corrosion dominated at later times. The new environment chamber enables the determination of Cu corrosion kinetics in the lab, especially the formation of paratacamite, which provides insight into Cu atmospheric corrosion in the field.Keywords
This publication has 41 references indexed in Scilit:
- Combined Effects of Gaseous Pollutants and Sodium Chloride Particles on the Atmospheric Corrosion of CopperCorrosion, 2005
- Corrosion of copper in seawater and its aerosols in a tropical islandCorrosion Science, 2005
- Effect of Carbon Dioxide on Sodium Chloride-Induced Atmospheric Corrosion of CopperJournal of the Electrochemical Society, 2005
- In Situ Studies of the Effect of SO[sub 2] on the Initial NaCl-Induced Atmospheric Corrosion of CopperJournal of the Electrochemical Society, 2005
- Effect of Sodium Chloride Particles on the Atmospheric Corrosion of Pure CopperCorrosion, 2004
- Characterization of Corrosion Products Formed on Copper in Urban, Rural/Coastal, and Hot Spring AreasJournal of the Electrochemical Society, 2001
- Copper patinas formed in the atmosphere—III. A semi-quantitative assessment of rates and constraints in the greater New York metropolitan areaCorrosion Science, 1987
- Copper patinas formed in the atmosphere—II. A qualitative assessment of mechanismsCorrosion Science, 1987
- Copper patinas formed in the atmosphere—I. IntroductionCorrosion Science, 1987
- Atmospheric Corrosion of Copper and SilverJournal of the Electrochemical Society, 1981