Fast and Precise Non-Contact Measurement of Cylindrical Surfaces with Air Gauges
Open Access
Abstract
In this paper, the results of an investigation on the application of air gauges in the measurement of out-of-roundness parameters are presented. The principle of the measuring system is explained, in particular the novel design of the floating gauge head. An algorithm for fully automated measurement and data processing is described. The results from a series of initial measurements provided the data for further simulations, which revealed possible sources of errors. The simulations helped to evaluate the influence of some of the parameters on the final measurement results. After various accuracy tests, the method accuracy (MA) parameter was calculated in relation to the dedicated reference form tester. The result MA = 9.29% was judged to be highly satisfactory considering the short measurement time and non-contact method.Keywords
Funding Information
- Ministry of Science and Higher Education in Poland (0614/SBAD/1529)
This publication has 27 references indexed in Scilit:
- Effect of Rotor Geometry on Bending Stiffness VariationMachines, 2021
- Reduction of Influence of the High-Frequency Noise on the Results of Surface Topography MeasurementsMaterials, 2021
- Multi-Dimensional Mathematical Wear Models of Vibration Generated by Rolling Ball Bearings Made of AISI 52100 Bearing SteelMaterials, 2020
- Frequency Domain Analysis and Precision Realization in Deterministic Figuring of Ultra-Precision Shaft PartsMaterials, 2020
- An investigation for the friction torque of a needle roller bearing with the roundness errorMechanism and Machine Theory, 2018
- Effects of honed cylinder liner surface texture on tribological properties of piston ring-liner assembly in short time testsTribology International, 2017
- Measurement of Diameter and Roundness on Incomplete Outline of Element with Three-lobbing DeviationProcedia Engineering, 2014
- Adaptive Monte Carlo and GUM methods for the evaluation of measurement uncertainty of cylindricity errorPrecision Engineering, 2013
- A reliable method of minimum zone evaluation of cylindricity and conicity from coordinate measurement dataPrecision Engineering, 2011
- Designing small samples for form error estimation with coordinate measuring machinesPrecision Engineering, 2011