Evaluation of engineering, economic and environmental suitability of waste filler incorporated asphalt mixes and pavements
Authors:
- 31 March 2021
- journal article
- research article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 22 (sup1) , S624-S640
Abstract
This study investigated the engineering, economic, and environmental feasibility of asphalt mixes containing brick dust (BD), recycled concrete aggregate dust (CD), limestone slurry dust (LD), rice straw ash (RSA), glass powder (GP), carbide lime (CL), and copper tailing (CT). The performance of asphalt mixes containing various wastes was evaluated against rutting, cracking and moisture sensitivity, and their comparison was made with the conventional mix containing stone dust (SD) filler. Subsequently, the asphalt pavements utilizing the aforesaid mixes as surface course were designed and their material cost and global warming potential (GWP) were analysed. In general, the waste fillers form superior performing mixes at relatively lower cost than conventional SD fillers. The LD and RSA emerged as the best and worst performing filler, respectively. The construction of single km of asphalt pavement made with LD-incorporated mixes found to have 11% lower cost, 11% lower GWP, and 75 ton less aggregates.Keywords
Funding Information
- Ministry of Human Resource Development (MHRD Fellowship to Jayvant Choudhary)
This publication has 24 references indexed in Scilit:
- Moisture damage resistance of hot-mix asphalt made with paper industry wastes as fillerJournal of Cleaner Production, 2016
- Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impactsJournal of Cleaner Production, 2015
- Influence of the geometrical and physical properties of filler in the filler–bitumen interactionConstruction and Building Materials, 2015
- Performance Characteristics of Bituminous Concrete with Industrial Wastes as FillerJournal of Materials in Civil Engineering, 2013
- Physical and Marshall Properties of Borogypsum Used as Filler Aggregate in Asphalt ConcreteJournal of Materials in Civil Engineering, 2013
- Evaluation of Permanent Deformation of CRM‐Reinforced SMA and Its Correlation with Dynamic Stiffness and Dynamic CreepThe Scientific World Journal, 2013
- Life-Cycle Assessment of the Production of Swiss Road MaterialsJournal of Materials in Civil Engineering, 2012
- Utilization of recycled brick powder as alternative filler in asphalt mixtureConstruction and Building Materials, 2011
- Modeling climate change impacts of pavement production and constructionResources, Conservation and Recycling, 2010
- Effects of mineral fillers on hot-mix asphalt laboratory-measured propertiesInternational Journal of Pavement Engineering, 2007