Analysis of the Effect of Ventilation Bars on the Packing Structure of Sinter Bed by DEM Simulation
Open Access
Abstract
The effect of ventilation bars on the porosity of a sinter bed charged on a sinter machine was investigated. The behavior of the sinter feed was calculated by discrete element method (DEM) simulation. By taking into account the adhesion force, the sinter feed in the wet state was represented and the simulation parameters were determined to reproduce the experimental values of the angle of repose. The porosity of the sinter bed was calculated, and the mechanism of the formation of the packing structure and the cause of the distribution of porosity in each region were clarified. As a result, it is shown that in the case of shear flow, the higher the powder pressure during flow, the higher the porosity.Keywords
This publication has 28 references indexed in Scilit:
- DEM study on size segregation and voidage distribution in green bed formed on iron ore sinter strandPowder Technology, 2019
- Improvement of Sinter Productivity by Control of Magnetite Ore Segregation in Sintering BedISIJ International, 2018
- The angle of repose and size segregation of iron ore granules: DEM analysis and experimental investigationPowder Technology, 2017
- Relationship Between Iron Ore Granulation Mechanisms, Granule Shapes, and Sinter Bed PermeabilityMineral Processing and Extractive Metallurgy Review, 2017
- Permeability of microporous wicks with geometric inverse to sintered particlesInternational Journal of Heat and Mass Transfer, 2016
- Quantitative Estimation of Gas Permeability of Softening Sinter Layer with Liquid PhaseISIJ International, 2015
- Improvement of Productivity by Stand-support Sintering in Commercial Sintering Machines.ISIJ International, 2000
- New Analysis Method of Sinter Cake Pore Structure for Permeability Evaluation.ISIJ International, 1994
- A Study on the Particle Size Segregation in the Sintering Bed Formed at the Feeding Stage of a Sinter MachineTetsu-to-Hagane, 1985
- A discrete numerical model for granular assembliesGéotechnique, 1979