Study on Strength Reduction Law and Meso-Crack Evolution of Lower Layered Cemented Tailings Backfill
Open Access
- 1 January 2022
- journal article
- research article
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 11 (3) , 1-17
Abstract
The green disposal of tailings solid waste is a problem to be solved in mine production. Cemented tailings filling stoping method can realize the dual goals of solid waste resource utilization and mined-out area reduction. However, the volume of the mined-out area of the open-pit method is larger than the filling capacity, resulting in the complex stratification of the underground backfill, and the strength of the backfill cannot meet the requirements. In this paper, according to the delamination situation, the specimens of horizontal and inclination angle layered cemented tailings backfill (LCTB) is made for a uniaxial compression test, and the failure process of delamination backfill is reduced by PFC. The results show that the corresponding reduction factor φ of horizontal LCTB is 0.560–0.932, and the corresponding φ value of inclination angle LCTB is 0.338–0.772. The failure mode of backfill in different layers is mainly manifested as a tensile failure. The PFC numerical simulation results are consistent with laboratory test results, which verifies the correctness of backfill failure. The research results provide a reliable theoretical basis for the strength design of backfill in goaf, which is of great significance for solid waste utilization and environmental protection.Keywords
This publication has 32 references indexed in Scilit:
- Multi-peak deformation behavior of jointed rock mass under uniaxial compression: Insight from particle flow modelingEngineering Geology, 2016
- Numerical simulation of land subsidence and verification of its character for an iron mine using sublevel cavingInternational Journal of Mining Science and Technology, 2016
- Estimation model for yield stress of fresh uncemented thickened tailings: Coupled effects of true solid density, bulk density, and solid concentrationInternational Journal of Mineral Processing, 2015
- A stability study of goaf based on mechanical properties degradation of rock caused by rheological and disturbing loadsInternational Journal of Mining Science and Technology, 2015
- Mechanical behavior of rock-like jointed blocks with multi-non-persistent joints under uniaxial loading: A particle mechanics approachEngineering Geology, 2015
- Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compressionComputers and Geotechnics, 2013
- Waste-filling in fully-mechanized coal mining and its applicationJournal of China University of Mining and Technology, 2008
- Design and Application of Underground Mine Paste Backfill TechnologyGeotechnical and Geological Engineering, 2007
- Colloquium 2004: Hydrogeotechnical properties of hard rock tailings from metal mines and emerging geoenvironmental disposal approachesCanadian Geotechnical Journal, 2007
- Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfillMaterials Letters, 2005