A comprehensive study on the effects of printing parameters on the mechanical properties of PLA
- 3 October 2024
- journal article
- research article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 31 (1) , 174-183
Abstract
Purpose: This study aims to investigate the effects of five different printing parameters, namely, printing speed (PS), printing temperature/nozzle temperature/extrusion temperature, heated-bed temperature, raster angle (RA) and layer height (LT), on mechanical properties. Design/methodology/approach: American Society for Testing and Materials (ASTM) standards were used for the specimen design. Then, the Taguchi method was used for the design of the experiment and an L16 orthogonal array was preferred. Tensile, Shore D and surface roughness tests were conducted on polylactic acid test specimens. The test results were analyzed using the signal-to-noise ratio and analysis of variance (ANOVA). Findings: As a result of the study, it was seen that RA is the most important parameter for the tensile strength, PS is for the hardness and LT is for the surface roughness. According to the ANOVA results, the effects of the RA, PS and LT on the maximum tensile strength, hardness and surface roughness were 41.59%, 69.51% and 44.6%, respectively. Originality/value: To the best of the authors’ knowledge, this study is one of the most comprehensive parameter optimization studies for additive manufacturing in the literature because it includes five different printing parameters and three mechanical test procedures.Keywords
This publication has 33 references indexed in Scilit:
- Additive manufacturing in the aerospace and automotive industries: Recent trends and role in achieving sustainable development goalsAin Shams Engineering Journal, 2023
- Direct additive manufacturing of metal parts for automotive applicationsJournal of Manufacturing Systems, 2023
- Additive manufacturing of titanium-based alloys- A review of methods, properties, challenges, and prospectsHeliyon, 2022
- Investigation of tensile properties of PLA–brass composite using FDMProgress in Additive Manufacturing, 2022
- Photopolymer formulation towards large scale additive manufacturing of autoclave capable toolingAdditive Manufacturing, 2022
- Fused deposition modeling based polymeric materials and their performance: A reviewPolymer Composites, 2021
- Fatigue characteristics of steels manufactured by selective laser meltingInternational Journal of Fatigue, 2019
- Impact of build envelope on the properties of additive manufactured parts from AlSi10MgOptics & Laser Technology, 2019
- FDM process parameters influence over the mechanical properties of polymer specimens: A reviewPolymer Testing, 2018
- Additive manufacturing: A framework for implementationInternational Journal of Production Economics, 2014