Mechanical and Thermal Performance of Cement Mortar Incorporating Super Absorbent Polymer (SAP)
Authors:
Open Access
- 1 November 2020
- journal article
- research article
- Published by Ital Publication in Civil Engineering Journal
- Vol. 6 (11) , 2231-2244
Abstract
Super Absorbent Polymer (SAP) is a favorable admixture which can influence various properties of cementitious materials. It mainly improves the water retaining properties of cement-based construction materials. In this paper, an experimental program was carried out to determine the mechanical and thermal performance of cement plaster containing SAP. Firstly, the absorption capacity of SAP was determined in different loading conditions and chloride solutions. Thereafter, the optimum dosage of SAP for cement plaster was also determined from five different proportions of SAP (0.05, 0.1, 0.3, 0.5 and 1% of cement mass) based on the compressive strength test results. The mortar incorporating 0.05% SAP of cement mass was selected as the optimum dosage, which yielded the highest compressive strength. Two slabs of 1í—1í—25 mm with 0.05% SAP and two slabs of 1í—1í—25 mm without SAP were cast to determine the thermal performance of the cement mortar with and without SAP. For this purpose, a wooden chamber of 2í—1í—1 m was constructed and the slab was placed in the middle of this chamber to carry out the thermal performance test of cement mortar. The slabs with 0.05% SAP showed promising results for acting as a thermal barrier in buildings compared to slabs without SAP. Doi: 10.28991/cej-2020-03091614 Full Text: PDFKeywords
This publication has 50 references indexed in Scilit:
- Effect of alkalinity and calcium concentration of pore solution on the swelling and ionic exchange of superabsorbent polymers in cement pasteCement and Concrete Composites, 2018
- Efficiency of internal curing by superabsorbent polymers (SAP) in PC-GGBS mortarsCement and Concrete Composites, 2018
- Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars — Development of yield stress and plastic viscosity over timeCement and Concrete Research, 2015
- The use of superabsorbent polymers to reduce cracking of bonded mortar overlaysCement and Concrete Composites, 2014
- Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratioJournal of Thermal Analysis and Calorimetry, 2013
- Interactions between superabsorbent polymers and cement-based composites incorporating colloidal silica nanoparticlesCement and Concrete Composites, 2013
- Controlling the coefficient of thermal expansion of cementitious materials – A new application for superabsorbent polymersCement and Concrete Composites, 2013
- Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkageCement and Concrete Research, 2012
- Superabsorbent Polymers — An Additive to Increase the Freeze-Thaw Resistance of High Strength Concrete2007
- Mechanical properties of cement mortars with superabsorbent polymers2007