Numerical Simulation of Deformation and Failure Mechanism of Main Inclined Shaft in Yuxi Coal Mine, China
Open Access
- 30 May 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (11) , 5531
Abstract
Disturbance stresses can cause deformation and damage to a tunnel’s rock, potentially threatening the mine’s safety. This paper investigates the effects of disturbance damage on the main inclined shaft due to the excavation of an electromechanical chamber in a deep inclined shaft at Yuxi Mine. Specifically, a numerical model was constructed using Midas GTX NX and Fast Lagrangian Analysis of Continua in Three Dimensions (FLAC3D) to match the actual engineering conditions, and to reveal the stresses and deformations in the surrounding rock of the main inclined shaft before and after the excavation of the main inclined shaft, the electromechanical chamber and the head chamber. The results revealed that the surrounding rock stress around the main inclined shaft is significantly influenced by excavation disturbance. The bottom bulge occurred due to the unstable vertical and shear stresses in the bottom coal bed moving into free space. After the excavation of the electromechanical chamber, the maximum displacement of the floor can be increased from 0.35468 m to 0.64301 m, nearly doubled, and a large area of surrounding rock deformation occurs in the inclined shaft falling roadway. Affected by excavation disturbance, the maximum deformation of floor can reach 1.06 m, with a wide fluctuation range. The main area of damage to the surrounding rock was identified, except for the main inclined shaft, which occurred near the intersection of the inclined shaft and the drop level location. This area is mainly affected by superimposed tensile stress damage, prone to large area floor heave and spalling. The research content is expected to provide certain theoretical support in taking measures to deal with the deformation and failure of the surrounding rock in a main inclined shaft.Keywords
Funding Information
- National Natural Science Foundation of China (51874315, 52074303, 2021YJSAQ24)
- Fundamental Research Funds for the Central Universities (51874315, 52074303, 2021YJSAQ24)
This publication has 25 references indexed in Scilit:
- Effect of rock mass and discontinuity mechanical properties and delayed rock supporting on tunnel stability in an underground mineEngineering Geology, 2018
- A case study on large deformation failure mechanism of deep soft rock roadway in Xin'An coal mine, ChinaEngineering Geology, 2017
- On enforcing maximum principles and achieving element-wise species balance for advection–diffusion–reaction equations under the finite element methodJournal of Computational Physics, 2016
- Empirical estimation of strength of jointed rocks traversed by rock bolts based on experimental observationEngineering Geology, 2015
- Numerical simulation of a jointed rock block mechanical behavior adjacent to an underground excavation and comparison with physical model test resultsTunnelling and Underground Space Technology, 2015
- Simulation of water resource loss in short-distance coal seams disturbed by repeated miningEnvironmental Earth Sciences, 2015
- Evaluation of directional drilling implication of double layered pipe umbrella system for the coal mine roof support with composite material and beam element methods using FLAC 3DJournal of Mining Science, 2014
- Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approachComputers and Geotechnics, 2014
- Gas outburst disasters and the mining technology of key protective seam in coal seam group in the Huainan coalfieldNatural Hazards, 2013
- Finite element modeling of stress distributions and problems for multi-slice longwall mining in Bangladesh, with special reference to the Barapukuria coal mineInternational Journal of Coal Geology, 2009