Modelling of Lubricated Electrical Contacts
Open Access
- 22 February 2022
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 10 (3) , 32
Abstract
Electrical contacts, although critically important for a wide range of applications, are susceptible to degradation due to fretting corrosion, especially when sliding and vibrations occur. To overcome fretting corrosion and sliding wear, lubricants are often used. However, the use of lubricants can cause other detrimental issues. Lubricants usually consist of non-conductive fluids such as hydrocarbons and fluorocarbons. Due to fluid dynamics, when sliding, vibration or other excitation occurs, these fluids can cause prolonged gaps between the conducting metal surfaces. Practically, this has been observed in data centers where vibrations due to technician maintenance or even earthquakes can occur. Depending on the viscosity and roughness of the surfaces, the time it takes these connector surfaces to return to solid conductive contact can be many seconds or longer. This work uses a novel theoretical model of the coupled fluid and solid mechanics between the rough metallic surfaces to evaluate these intermittent breaks in contact due to sliding. The influence of variation in lubricant properties, roughness, contact radius and contact force are considered by the model.Keywords
This publication has 60 references indexed in Scilit:
- A Multiphysics Finite Element Model of a 35A Automotive Connector Including Multiscale Rough Surface ContactJournal of Electronic Packaging, 2012
- A new simulation approach to characterizing the mechanical and electrical qualities of a connector contactThe European Physical Journal Applied Physics, 2010
- The Thermoelastic Behavior of Thrust Washer Bearings Considering Mixed Lubrication, Asperity Contact, and Thermoviscous EffectsTribology Transactions, 2008
- The Behavior of Thrust Washer Bearings Considering Mixed Lubrication and Asperity ContactTribology Transactions, 2006
- The automotive connector: The influence of powering and lubricating a fretting contact interfaceProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2000
- Application of Average Flow Model to Lubrication Between Rough Sliding SurfacesJournal of Lubrication Technology, 1979
- The Lubrication of Electrical ContactsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1978
- An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic LubricationJournal of Lubrication Technology, 1978
- Thermal contact conductanceInternational Journal of Heat and Mass Transfer, 1969
- Contact of nominally flat surfacesProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1966