Flux-weakening strategy for high speed PMSM for vehicle application
Authors:
- 1 November 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Abstract
High speed Permanent Magnet Synchronous Motors (PMSM) are used in electrical vehicles because of their strong power density. The high speed implies a big electromotive force and requires flux-weakening. Usual control algorithms do flux-weakening by adding negative Id current when the required voltage by the current regulation exceeds the maximum voltage depending on the battery. If the magnet can be totally defluxed then it is better to use a Maximum Torque Per Volt (MTPV) strategy. Furthermore there is no speed regulation in the control and the driver gives a torque reference that has to be limited to the reachable operating points; the battery power limit has to be taken into account in addition to the voltage and current limits. The d-q current reference are calculated to minimize the total current magnitude required to reach the reference torque. This paper presents a salient pole PMSM control that calculates the minimum magnitude current references to obtain the reference torque while respecting the voltage, current and power limits with a flux-weakening strategy and including MTPV operation in a unified algorithm. The effectiveness of the proposed method is observed through simulations.Keywords
This publication has 22 references indexed in Scilit:
- Maximum Torque per Volt operation and stability improvement of PMSM in deep flux-weakening Region2012
- Voltage Control Technique for the Extension of DC-Link Voltage Utilization of Finite-Speed SPMSM DrivesIEEE Transactions on Industrial Electronics, 2011
- Unified Direct-Flux Vector Control for AC Motor DrivesIEEE Transactions on Industry Applications, 2011
- Experimental Verification of Deep Field Weakening Operation of a 50-kW IPM Machine by Using Single Current RegulatorIEEE Transactions on Industry Applications, 2010
- IPMSM control regime for a hybrid-electric vehicle application2010
- A new deep field-weakening strategy of IPM machines based on single current regulator and voltage angle control2010
- Novel flux weakening control algorithm for PMSMS2009
- Active Flux Concept for Motion-Sensorless Unified AC DrivesIEEE Transactions on Power Electronics, 2008
- Novel Flux-Weakening Control of an IPMSM for Quasi-Six-Step OperationIEEE Transactions on Industry Applications, 2008
- High-performance PM synchronous motor drive for an electrical scooterIEEE Transactions on Industry Applications, 2001