Optimization of Bypass Outlet Guide Vane for Low Interaction Noise
Authors:
- 1 June 2014
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 52 (6) , 1145-1158
Abstract
An optimization approach has been developed and applied to a fan stage representative of a modern turbofan engine to achieve novel, realistic, low-interaction-tone noise bypass outlet guide vanes with acceptable mechanical and aerodynamic properties. The incorporation of axial sweep in the design of the bypass stators is used as a passive method to achieve sizeable reductions in the discrete frequency tones generated by the impingement of the fan wakes. The acoustic benefits, mechanical properties, and aerodynamic performance of an unconventional sweep profile of the stator leading edge have been investigated numerically in an optimization framework using a combination of computational fluid dynamics and finite-element methods to solve each part of the problem. The results obtained in two separate optimizations to reduce interaction noise at the noise-critical sideline operating condition are presented and analyzed.Keywords
This publication has 18 references indexed in Scilit:
- Analytically-based Approach to Rotor-stator Interaction Noise in Mean Swirling Flow2004
- Adjoint Calculation of Sensitivities of Turbomachinery Objective FunctionsJournal of Propulsion and Power, 2003
- The Use of Sweep and Dihedral in Multistage Axial Flow Compressor Blading—Part I: University Research and Methods DevelopmentJournal of Turbomachinery, 2002
- Benefits of stator sweep and lean for a high tip speed fan2002
- Fan Noise Reduction: An OverviewInternational Journal of Aeroacoustics, 2002
- Benefits of Swept-and-Leaned Stators for Fan Noise ReductionJournal of Aircraft, 2001
- Application of CFD to wake/aerofoil interaction noise - A flat plate validation case2001
- DESIGN SELECTION AND ANALYSIS OF A SWEPT AND LEANED STATOR CONCEPTJournal of Sound and Vibration, 1999
- The exploitation of three-dimensional flow in turbomachinery designProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1998
- Subsonic transport noise1980