Effects of Flat-Shaped Face Layer Particles and Core Layer Particles of Intentionally Greater Thickness on the Properties of Wood-Reduced Particleboard
Open Access
Abstract
Against the background of the intention to reduce the amount of wood used in the production of particleboard for economic reasons, the associated reduction in panel density and consequently the panel properties, the influence of the alternative use of flat-shaped face layer particles and core layer particles of intentionally greater thickness on the panel properties was investigated. Appropriate particles were made for this purpose, panels with typical (650 kg/m3) and reduced wood usage (500 kg/m3) were produced, and e.g., their bending properties and internal bond strength were determined. Particle size characterization was done with sieve analysis, image analysis (length and width measurement), and manual thickness gauging. It was found that the alternative use of the flat-shaped particle significantly increased the bending properties and thus the level of the reference can be achieved despite the reduced use of wood. The reason for the increased bending properties was assumed to be the higher strength of the particles themselves and the more effective adhesive bond between the particles. The increase in internal bond strength when using alternative particles could be attributed solely the different production history (e.g., use of fresh cutting blades and laboratory scale production).Keywords
Funding Information
- Fachagentur Nachwachsende Rohstoffe (22005613)
This publication has 11 references indexed in Scilit:
- Effect of increasing core layer particle thickness on lightweight particleboard propertiesEuropean Journal of Wood and Wood Products, 2019
- Experimental determination of the compression resistance of differently shaped wood particles as influencing parameter on wood-reduced particleboard manufacturingEuropean Journal of Wood and Wood Products, 2017
- Influence of face-to-core layer ratio and core layer resin content on the properties of density-decreased particleboardsEuropean Journal of Wood and Wood Products, 2016
- Understanding the consumer: Multi-modal market research on consumer attitudes in Germany towards lightweight furniture and lightweight materials in furniture designEuropean Journal of Wood and Wood Products, 2014
- Einfluß ausgewählter Strukturparameter auf die Zug-und Druckfestigkeit von SpanplattenEuropean Journal of Wood and Wood Products, 1990
- Zur Patentgeschichte der SpanplatteEuropean Journal of Wood and Wood Products, 1981
- Einfluß der Rohdichte auf die Eigenschaften von HolzwerkstoffenEuropean Journal of Wood and Wood Products, 1963
- Erreichte und erreichbare Verminderung der Anisotropie in Holzwerkstoff-PlattenEuropean Journal of Wood and Wood Products, 1959
- Zur Mechanik der mehrschichtigen SpanplatteEuropean Journal of Wood and Wood Products, 1958
- Entwicklung, Stand und holzwirtschaftliche Bedeutung der HolzspanplattenherstellungEuropean Journal of Wood and Wood Products, 1955