Principles of Acid Stimulation

Author:

Abstract
If properly designed and implemented, acid stimulation treatments provide a method for improving the productivity of oil and gas wells. The success of these treatments depends to a great extent upon proper acid selection and good treatment design. This can be accomplished only with a good understanding of the fundamental principles of acid stimulation. This paper reviews these important principles and includes descriptions of the basic concepts of damage removal, reservoir stimulation, acid reaction mechanisms, job design and diversion technology. Example field case histories are included to illustrate the benefits that can be derived from properly administered acid treatments. Introduction Productivity improvement is the process of increasing production from oil or gas wells by removing flow restrictions that exist near the wellbore and/or by altering the pattern of flow towards the wellbore. Basically, there are two causes of impaired productivity which can be improved by acid treatments. First, near-wellbore formation damage can cause a well to produce at a rate lower than the true reservoir flow capacity. This type of problem can be remedied by a matrix acidizing treatment. The second cause of low productivity is poor reservoir permeability. productivity is poor reservoir permeability. This limitation can be diminished through the use of a different acid stimulation technique known as acid fracturing. The distinction between matrix acidizing and acid fracturing is an important one. Matrix acidizing treatments are performed by injecting appropriate acids into the near-wellbore region of the formation at rates low enough to avoid fracturing, thus allowing the fluids to permeate the rock matrix. Such treatments are performed with HF-HCl acid in sandstone reservoirs and HCl acid in carbonate reservoirs. Fracturing, on the other hand, is the practice of generating a large crack within the practice of generating a large crack within the formation that extends perhaps one hundred meters from the wellbore. By altering the reservoir flow pattern toward the well, a fracturing treatment pattern toward the well, a fracturing treatment can improve the flow rate of an undamaged well. Thus, the principal application of fracturing is to stimulate low permeability reservoirs, although additional benefit can be realized by removing near-wellbore damage that might be present. The final result from both damage removal and fracture stimulation treatments depends on the successful injection of the treating fluids into the zone(s) where they are needed. Accordingly, a review of modern fluid diversion techniques has been included to demonstrate the amount of well productivity improvement which can be realized productivity improvement which can be realized when acid treatments are successfully injected into all zones. Finally, several field case histories are included to point out the benefits that can be derived from properly designed and implemented...