Damage in etching of (Ba, Sr)TiO3 thin films using inductively coupled plasma
Authors:
- 1 July 2001
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 19 (4) , 1063-1067
Abstract
High dielectric (Ba, Sr)TiO3 thin films were etched in an inductively coupled plasma as a function of the Cl2/Ar gas mixing ratio. Under Cl2 (20)/Ar (80), the maximum etch rate of the BST film was 400 Å/min and the selectivities of BST to Pt and PR obtained were 0.4 and 0.2, respectively. Etching by-products remained on the surface of BST and resulted in varying the stochiometry. Therefore, we investigated the surface of the etched BST using x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and x-ray diffraction (XRD). From the results of XPS analysis, we found that metal (Ba or Sr) chloride compounds remained on the surface of the etched BST for high boiling points. The morphology of the etched surface was evaluated with AFM. The surface roughness decreased as the Cl2 increased in the Cl2/Ar plasma. From the results of XRD analysis, the crystallinity of etched BST films under Ar only and under Cl2 (20)/Ar (80) was similar to that of as-deposited BST. However, the (100) diffraction peak abruptly decreased at the Cl2 only plasma. It was assumed that metal (Ba or Sr) chloride compounds remained on the etched BST surface and changed the stoichiometry, resulting in crystallinity of the BST film during the etch process.Keywords
This publication has 11 references indexed in Scilit:
- Etching of (Ba,Sr)TiO3 film by chlorine plasmaJournal of Vacuum Science & Technology A, 2000
- Progress in the developments of (Ba,Sr)TiO3 (BST) thin films for Gigabit era DRAMsMaterials Chemistry and Physics, 2000
- Etching mechanism of (Ba, Sr)TiO3 films in high density Cl2/BCl3/Ar plasmaJournal of Vacuum Science & Technology A, 2000
- Etching Characteristics and Mechanism of Ba0.7Sr0.3TiO3 Thin Films in an Inductively Coupled PlasmaJapanese Journal of Applied Physics, 2000
- Study on surface reaction of (Ba, Sr)TiO3 thin films by high density plasma etchingJournal of Vacuum Science & Technology A, 1999
- Plasma processing damage in etching and depositionIBM Journal of Research and Development, 1999
- Dry etching of (Ba, Sr)TiO3with Cl2, SF6, and CF4Integrated Ferroelectrics, 1998
- Inductively coupled plasma etching of (Ba,Sr)TiO3 thin filmsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1998
- New method to determine the carbon concentration in siliconApplied Physics Letters, 1986
- Effect of ion-beam sputter damage on Schottky barrier formation in siliconApplied Physics Letters, 1981