Finite element analysis of Brillouin gain in SBS-suppressing optical fibers with non-uniform acoustic velocity profiles
Authors:
- 20 August 2009
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 17 (18) , 15685-15699
Abstract
A numerical investigation is presented of Brillouin gain in SBS-suppressing optical fibers with non-uniform acoustic velocity profiles. The equation determining the acoustic displacement in response to the electrostriction caused by the pump and Stokes waves reduces to the non-homogeneous Helmholtz equation for fibers with a uniform acoustic velocity profile. In this special case the acoustic displacement and subsequently the Brillouin gain are calculated using a Green's function. These results are then used to validate a finite-element solution of the same equation. This finite element method is then used to analyze a standard large mode area fiber as well as fibers incorporating four different acoustic velocity profiles with 5% variation in the acoustic velocity across the core. The profiles which suppress the peak Brillouin gain most effectively exhibit a maximum acoustic gradient near the midpoint between the center and boundary of the fiber core. These profiles produce 11 dB of suppression relative to standard large mode area fibers.Keywords
This publication has 21 references indexed in Scilit:
- Diffractive-optics-based beam combination of a phase-locked fiber laser arrayOptics Letters, 2008
- Power Scaling of Single-Frequency Ytterbium-Doped Fiber Master-Oscillator Power-Amplifier Sources up to 500 WIEEE Journal of Selected Topics in Quantum Electronics, 2007
- Al/Ge co-doped large mode area fiber with high SBS thresholdOptics Express, 2007
- 502 Watt, single transverse mode, narrow linewidth, bidirectionally pumped Yb-doped fiber amplifierOptics Express, 2007
- Suppression of stimulated Brillouin scattering in high-power single-frequency fiber amplifiersOptics Letters, 2006
- Single-frequency master-oscillator photonic crystal fiber amplifier with 148 W output powerOptics Express, 2006
- Modeling of stimulated Brillouin scattering in optical fibers with arbitrary radial index profileJournal of Lightwave Technology, 2005
- 100 W, single-frequency operation of an injection-locked Nd:YAG laserOptics Letters, 2005
- Single-frequency, single-mode, plane-polarized ytterbium-doped fiber master oscillator power amplifier source with 264 W of output powerOptics Letters, 2005
- Single-mode operation of a coiled multimode fiber amplifierOptics Letters, 2000