Computational Fault Time Difference-Based Fault Location Method for Branched Power Distribution Networks
Open Access
- 13 December 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 181972-181982
Abstract
Fault location in a power distribution network is a challenging task due to the presence of multilayer branches and short line lengths. Existing fault-location methods generally require measurements at both ends of each branch, which requires a large number of measuring points. The placement of measuring points at branch terminals is an approach that can be used to reduce the number of measuring points. Such a measuring point layout allows the existing fault-location methods for power distribution networks to determine fault points after identifying faulted branches. However, these methods fail to locate a fault if the faulted branch cannot be correctly identified. This paper proposes a traveling-wave-based fault-location method for branched power distribution networks without requiring faulted branches to be identified. In the proposed method, by using the first arrival times of the fault-generated traveling waves detected at the substation and each branch terminal, the computational fault time difference (CFTD) is defined. By calculating the value of CFTD, the fault point is directly searched out. Finally, the quartile method is used to eliminate the impact of the arrival-time error on the fault-location accuracy of the proposed method. The simulation results verify the high accuracy, traveling-wave velocity stability, and strong arrival-time error robustness of the proposed method.Keywords
Funding Information
- National Basic Research Program of China (2017YFB0902900, 2017YFB0902903)
This publication has 26 references indexed in Scilit:
- Fault location on branched networks using mathematical morphologyIET Generation, Transmission & Distribution, 2017
- Accurate Two-Terminal Transmission Line Fault Location Using Traveling WavesIEEE Transactions on Power Delivery, 2017
- Research on multi-terminal traveling wave fault location method in complicated networks based on cloud computing platformProtection and Control of Modern Power Systems, 2017
- Heuristic Method for Fault Location in Distribution Feeders With the Presence of Distributed GenerationIEEE Transactions on Smart Grid, 2016
- Single phase fault location in electrical distribution feeder using hybrid methodEnergy, 2016
- Settings-Free Traveling-Wave-Based Earth Fault Location Using Unsynchronized Two-Terminal DataIEEE Transactions on Power Delivery, 2016
- Traveling Wave-Based Fault Location on Half-Wavelength Transmission LinesIEEE Latin America Transactions, 2016
- Fault section estimation in power distribution network using impedance‐based fault distance calculation and frequency spectrum analysisIET Generation, Transmission & Distribution, 2014
- Fault Location on Branched Networks Using a Multiended ApproachIEEE Transactions on Power Delivery, 2014
- Real-time detection of fault-induced transients in transmission linesElectronics Letters, 2010