Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area
Open Access
- 21 February 2022
- journal article
- research article
- Published by Springer Nature in Production Engineering
- Vol. 16 (2-3) , 261-273
Abstract
The components of a body in white consist of many individual thin-walled sheet metal parts, which usually are manufactured in deep-drawing processes. In general, the conditions in a deep-drawing process change due to changing tribology conditions, varying degrees of spring back, or scattering material properties in the sheet blanks, which affects the resulting pre-strain. Mechanical joining processes, especially clinching, are influenced by these process-related pre-strains. The final geometric shape of a clinched joint is affected to a significant level by the prior material deformation when joining with constant process parameters. That leads to a change in the stiffness and force transmission in the clinched joint due to the different geometric dimensions, such as interlock, neck thickness and bottom thickness, which directly affect the load bearing capacity. Here, the influence of the pre-straining in the deep drawing process on the force distribution in clinch points in an automotive assembly is investigated by finite-element models numerically. In further studies, the results are implemented in an optimization tool for designing clinched components. The methodology starts with a pre-straining of metal sheets. This step is followed by 2D rotationally symmetric forming simulations of the joining process. The resulting mesh of each forming simulation is rotated and 3D models are obtained. The clinched joint solid model with pre-strains is used further to determine the joint stiffnesses. With the simulation of the same test set-up with an equivalent point-connector model, the equivalent stiffness for each pre-strain combination is determined. Simulations are performed on a clinched component to assess the influence of pre-strain and sheet thinning on the clinched joint loadings by using the equivalent stiffnesses. The investigations clearly show that for the selected component, the loadings at the clinch points are dependent on the sheet thinning and the stiffnesses due to pre-strain. The magnitude of the influence varies depending on the quantity considered. For example, the shear force is more sensitive to the joint stiffness than to the sheet thinning.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (TRR 285 – 418701707)
- Universität Paderborn
This publication has 21 references indexed in Scilit:
- Analysis of spot weld distribution in a weldment—numerical simulation and topology optimizationThe International Journal of Advanced Manufacturing Technology, 2018
- Influence of sheet thickness on mechanical clinch–compress joining technologyProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2017
- Equivalent modelling strategy for a clinched joint using a simple calibration methodThin-Walled Structures, 2017
- Spot weld reduction methods for automotive structuresStructural and Multidisciplinary Optimization, 2015
- Joining of dissimilar materialsCIRP Annals, 2015
- Effect of aluminum pre-straining on strength of clinched galvanized SAE1004 steel-to-AA6111-T4 aluminumJournal of Materials Processing Technology, 2015
- An adaptive optimization procedure for spot-welded structuresComputers & Structures, 2011
- A large-scale finite element point-connector model for self-piercing rivet connectionsEuropean Journal of Mechanics - A/Solids, 2010
- Ensuring the integrity in clinching processJournal of Materials Processing Technology, 2006
- Joining of aluminium using self-piercing riveting: Testing, modelling and analysisInternational Journal of Crashworthiness, 2004