Limit-State Curve of Base-Course Material and Its Relevance for Resilient Modulus Testing
Authors:
- 1 February 2006
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 132 (2) , 173-182
Abstract
The limit state characteristics of base-course granular materials were obtained using a typical triaxial testing equipment devoted to the measurement of resilient modulus. Accurate monitoring of axial strain during isotropic and anisotropic compression was used to determine the stress conditions where significant irrecoverable strains occur for samples prepared by static compression, Proctor rammer, and vibratory compaction. The limit state curve is highly anisotropic, centered about the q∕p=1 line. It is sensitive to sample preparation technique and fines content. The Strategic Highway Research Program (SHRP) procedure corresponds to stress paths during conditioning and repeated loading that remain within the limit state curve of the control base course material containing 3.5% fines. The resilient modulus values reflect henceforth the behaviour of the same material with its original particle contact distribution. The Laboratoires des Ponts et Chaussées (LCPC) procedure is characterized by stress paths t...Keywords
This publication has 4 references indexed in Scilit:
- Yielding of Mexico City Clay and Other Natural ClaysJournal of Geotechnical Engineering, 1992
- The general and congruent effects of structure in natural soils and weak rocksGéotechnique, 1990
- Studies of the influence of non-linear stress–strain characteristics in soil–structure interactionGéotechnique, 1986
- Stress-Strain Characteristics of Sand in a Particle-Crushing RegionSoils and Foundations, 1984