Thermodynamic Analyses of Biomass Gasification Integrated Externally Fired, Post-Firing and Dual-Fuel Combined Cycles
Open Access
- 26 January 2015
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 7 (2) , 1248-1262
Abstract
In the present work, the results are reported of the energy and exergy analyses of three biomass-related processes for electricity generation: the biomass gasification integrated externally fired combined cycle, the biomass gasification integrated dual-fuel combined cycle, and the biomass gasification integrated post-firing combined cycle. The energy efficiency for the biomass gasification integrated post-firing combined cycle is 3% to 6% points higher than for the other cycles. Although the efficiency of the externally fired biomass combined cycle is the lowest, it has an advantage in that it only uses biomass. The energy and exergy efficiencies are maximized for the three configurations at particular values of compressor pressure ratios, and increase with gas turbine inlet temperature. As pressure ratio increases, the mass of air per mass of steam decreases for the biomass gasification integrated post-firing combined cycle, but the pressure ratio has little influence on the ratio of mass of air per mass of steam for the other cycles. The gas turbine exergy efficiency is the highest for the three configurations. The combustion chamber for the dual-fuel cycle exhibits the highest exergy efficiency and that for the post-firing cycle the lowest. Another benefit of the biomass gasification integrated externally fired combined cycle is that it exhibits the highest air preheater and heat recovery steam generator exergy efficiencies.Keywords
This publication has 16 references indexed in Scilit:
- Thermodynamic analyses of an externally fired gas turbine combined cycle integrated with a biomass gasification plantEnergy Conversion and Management, 2013
- Biomass integrated gasification combined cycle power generation with supplementary biomass firing: Energy and exergy based performance analysisEnergy, 2011
- Investigation of a multi-generation system using a hybrid steam biomass gasification for hydrogen, power and heatInternational Journal of Hydrogen Energy, 2010
- A study of energy production from cork residues: Sawdust, sandpaper dust and triturated woodEnergy, 2010
- Optimum conditions for a natural gas combined cycle power generation system based on available oxygen when using biomass as supplementary fuelEnergy, 2009
- Techno-economic analysis of co-fired biomass integrated gasification/combined cycle systems with inclusion of economies of scaleEnergy, 2003
- Exergoeconomic analysis of power plants operating on various fuelsApplied Thermal Engineering, 2003
- Gasification of biomass wastes and residues for electricity productionBiomass and Bioenergy, 1997
- Biomass-Gasifier/Aeroderivative Gas Turbine Combined Cycles: Part A—Technologies and Performance ModelingJournal of Engineering for Gas Turbines and Power, 1996
- Exergoeconomic evaluation and optimization of energy systems — application to the CGAM problemEnergy, 1994