Influence of Pre-Tension on Free-End Torsion Behavior and Mechanical Properties of an Extruded Magnesium Alloy
Open Access
Abstract
In this study, the influence of pre-tension on free-end torsion behavior and compression mechanical properties and micro-hardness of an extruded AZ31 Mg alloy was investigated using electron backscatter diffraction (EBSD), compression testing and micro-hardness testing. The result indicates that pre-tension can cause significant dislocation strengthening, which can increase the torsion yield strength and make the shear stress–shear strain curve of the pre-tension sample almost parallel to that of the as-extruded sample during plastic deformation stage. Texture in edge position on the cross-section of both the pre-tension and as-extruded samples can be rotated towards the extrusion direction by about ~30° by free-end torsion. The Swift effect is mainly responsible for the occurrence of massive extension twins in the central region. In contrast, normal stress is the main cause of extension twins occurring in the edge region. However, the effect of extension twins on micro-hardness is less than that of dislocations. The micro-hardness of both free-end torsion specimens increases almost linearly with increasing distance from center to edge on the cross-section. Nevertheless, the increase in micro-hardness of the pre-tension and then torsion sample is inconspicuous because pre-tension leads to dislocation proliferation and dislocation accumulation saturation. The result also indicates that both pre-tension and free-end torsion can lead to dislocation strengthening, which can obviously increase the micro-hardness and compressive yield stress. The underlying mechanisms were explored and discussed in detail.Keywords
Funding Information
- Natural Science Foundation of Chongqing, China (cstc2021jcyj-msxmX0433, 51975479, 52174374, 51901028)
- National Natural Science Foundation of China (cstc2021jcyj-msxmX0433, 51975479, 52174374, 51901028)
This publication has 37 references indexed in Scilit:
- Dependence of Microstructure and Hardening Behavior on Torsion Strain and Strain Rate in Extruded AZ31 RodsAdvanced Engineering Materials, 2016
- Strengthening and toughening of extruded magnesium alloy rods by combining pre-torsion deformation with subsequent annealingMaterials Science and Engineering: A, 2016
- Reducing tension–compression yield asymmetry by free end torsion in extruded Mg alloyMaterials Science and Technology, 2016
- Processing and properties of magnesium containing a dense uniform dispersion of nanoparticlesNature, 2015
- Correlation between swift effects and tension–compression asymmetry in various polycrystalline materialsJournal of the Mechanics and Physics of Solids, 2014
- Microstructure evolution, hardening and thermal behavior of commercially pure copper subjected to torsion deformationMaterials Science and Engineering: A, 2014
- Experimental microindentation of pure copper subjected to severe plastic deformation by combined tension–torsionMaterials Science and Engineering: A, 2013
- New interpretation of monotonic Swift effects: Role of tension–compression asymmetryMechanics of Materials, 2013
- Variant selection of primary, secondary and tertiary twins in a deformed Mg alloyActa Materialia, 2012
- Texture and Mechanical Behavior of Magnesium During Free-End TorsionJournal of Engineering Materials and Technology, 2008